4416 N Colour light departure signal with distant signal
€64.95
Delivery time: 2-4 Werktage
Article no.: 4416
weee DE86057721
Product information "N Colour light departure signal with distant signal"
Warn- und Sicherheitshinweise
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!
Hersteller
Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt
Customers also bought
Signal in standard construction. Filigree brass mast and authentic varnishing. With base socket for easy mounting. With 3 LEDs maintenance free. Signal aspects Hp0, Hp1 and Hp2. Suitable control module: item 5222. Height: 4,4 cm.
available
Signal in standard construction. Filigree brass mast and authentic varnishing. With base socket for easy mounting. With 2 LEDs maintenance free. Signal aspects Hp0 and Hp1. Suitable control module: item 5221. Height: 4,4 cm.
available
With a series of up to three magnets underneath the road stationary commands can be triggered, e. g. a speed variation or the switching of various light functions.Ø 0.4 x H 0.5 cm
available
The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine. Dimensions: L 500 x W 0.3 x H 0.1 cm.
Content: 5 m (€3.59 / 1 m)
available
High-grade litz wire for low-loss current feed and signal transmission.
Content: 25 m (€0.34 / 1 m)
available
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm
available