Specialist dealer search

Download Center

Service / Help

Experience since 1988

Go to homepage
€0.00*
N Colour light stop signal, low

4418 N Colour light stop signal, low

€31.95*

Prices incl. VAT plus shipping costs

Create review

Delivery time: 2-4 Werktage

Stk
Article no.: 4418

weee DE86057721

Product information "N Colour light stop signal, low "

Signal in standard construction, with patented base socket for easy mounting. With each 2 red and white LEDs maintenance free. It is the smallest serially produced light signal model. Signal aspects Sh0 and Sh1. Suitable control module: item 5221. Height: 0,56 cm.

Warn- und Sicherheitshinweise

Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!


Hersteller

Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

.PDF
4418 ( 673.84 kb )

Customers also bought

N Colour light block signal
4411 N Colour light block signal
Signal in standard construction. Filigree brass mast and authentic varnishing. With base socket for easy mounting. With 2 LEDs maintenance free. Signal aspects Hp0 and Hp1. Suitable control module: item 5221. Height: 4,4 cm.

€27.95*

available

Stk
H0 Colour light block signal
4011 H0 Colour light block signal
Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 2 LEDs, maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: item 5221. Height: 7,9 cm.

€19.50*

available

Stk
Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm

€9.95*

available

Stk
InduktivCharger
8408 InduktivCharger
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

€129.95*

available

Stk
Electronic relay 2 x 2UM
5552 Electronic relay 2 x 2UM
2 separate bistable relays, each with 2 contacts. The relays have no time limits but can be used with continuous current. To control colour light signals and semaphore signals, barriers, block- and train change automatic and so on. Control by positive switching impulses resp. by continuous current or AC. Power consumption: 2 x 14 mA. Maximum load for each contact: 2 A.

€37.95*

available

Stk
Plug-in rail for interior lighting on board, 12-pole
6049 Plug-in rail for interior lighting on board, 12-pole
The practical 12-pin plug-in rail connects up to 12 power consumers – simply by jacks for plugging in the resistors and diodes. Suitable for using with LED-floor interior lighting items 6045 – 6048. No plugs, screw terminals or soldering required. In order to make even very thin cables and litz wires pluggable, we recommend the adapter pins for rails, item 6044. Dimensions: L 3,2 x W 2,1 x H 0,7 cm.

€8.95*

available

Stk