1534 H0 Nature‘s call in jeans, moving

Couple shoots selfie with functional flashlight. Irregular flashing simulated by micro-LED from the mobile phone. Mounting depth: 38 mm.

Equipped with a base socket for exceptionally easy installation. Maintenance-free by LED lighting.L 1 x W 1 x H 3.3 cm

The two traffic lights are designed for simple traffic scenarios that require opposing signal patterns, such as in single-lane traffic control at construction sites or at a basic intersection to regulate traffic from a side street into a oneway street. The corresponding control module is intended for use with the IR Mini, item 8403, whose infrared commands allow CarMotion vehicles to stopp and start alternately at the lights. The light poles can be removed from their bases, enabling the lights to be mounted like standard traffic lights.

These LED light strips are intended solely for stationary lighting applications, such as simulating neon tubes in buildings or at train platforms. They are made from flexible material. The LED strips are designed for operation with the power modules, items 5215, 5225, or 5208, or the LED dimmer, item 5590, or with DC voltages of approx. 18 V and above. The included resistors allow for brightness adjustment.Recommended operating voltage: 24 V DC, total current without series resistor: 11 mA. Connection cable included.The light strip, equipped with 5 white (5700k) LEDs, has a total length of approx. 17 mm.

These LED light strips are intended solely for stationary lighting applications, such as simulating neon tubes in buildings or at train platforms. They are made from flexible material. The LED strips are designed for operation with the power modules, items 5215, 5225, or 5208, or the LED dimmer, item 5590, or with DC voltages of approx. 18 V and above. The included resistors allow for brightness adjustment.Recommended operating voltage: 24 V DC, total current without series resistor: 11 mA. Connection cable included.The light strip, equipped with 5 warm-white (2200k) LEDs, has a total length of approx. 17 mm.

Functional model.Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlL 8.5 x W 3.5 x H 4.3 cm