Electronic

Viessmann offers not only signals and lights, but also a complete and innovative digital system as well as a comprehensive range of model railway electronics.

The facts speak for themselves:

Top digital system Commander and many electronic modules for analogue and digital operation
Compatible with model railway electrics and electronics from other manufacturers
Suitable for all sizes
Very reliable
Silver-plated contacts on all relays and control panels for greater operational reliability and long contact life.

Viessmann electronic products are not only easy to use, but of course also very reliable and affordable.

Software

Commander and Accessories

Electronic Digital

Electronic Analog

Electronic Effect

Electronic Mechanic

House lighting

9565 0 Switchpoint light with adapter for point motor and universal switch 4560

This switchpoint light can be mounted into an adapter on the longitudinal output of the item 4560 universal drive. A white LED provides illumination, the connection is achieved via cables. The realistic and bright display of the directions of the turnouts enhances the image of any railway station or shunting yard. A casing for both right- and left-facing turnouts is included. Dimensions: L 2,9 x W 2 x H 0,53 cm.

€20.50*

available

Stk

5215 2A Power module

The ideal solution for stable and powerful switching current as well as bright and flicker-free LED-lighting. To increase the switching power of digital decoders with separate voltage feed. For connection to the decoders items 5211, 5231 and 5280. Suitable for all decoders even from other producers in case an external power supply input is offered. One power module is able to supply up to 100 LED lights and several digital signals and decoders. Power rating: 2A.

€26.95*

available

Stk

5225 5A Power module

The ideal solution for stable and powerful switching current as well as bright and flicker-free LED-lighting. To increase the switching power of digital decoders with separate voltage feed. For connection to the decoders items 5211, 5231, 5280 and 5285 and digital signals. Suitable for all decoders even from other producers in case an external power supply input is offered. One power module is able supply to 200 LED lights or several decoders. Power rating: 5A. Protected against overload, a green LED indicates the readiness for operation.

€38.50*

available

Stk

5539 8-fold flashing light

The speed is adjustable and 2 functions are switchable. Function A: The outputs are switched in succession. So either one lamp or one LED is lit at the time. Function B: The outputs are switched on in succession and switched off all at once. Best use for advertising lighting.

€38.95*

available

Stk

5021 Blaze flickering

The blaze flickering generates a realistic fire effect of a blazing fire. Up to 7 red and yellow miniature bulbs all flicker in a different rhythm, suggesting to the observer the striking effect of a real burning fire. The intensity can be adjusted steplessly to suit the specific application and your own desire. The following applications are possible: Burning houses, camp fires (in the forest, by the lake), stoves etc. The set includes 2 yellow and 1 red bulbs. It is possible to upgrade to 7 bulbs items 3501 (yellow), 3502 (red) and 3503 (clear). Useable with camp fire item 5022.

€51.50*

available

Stk

5831 Christmas tree, track size-independent

This unique Christmas tree, crafted through 3D printing, impresses with its delicate branches adorned with hand-painted golden ornaments and a lifelike colourful string of lights. Just like the original, the string of lights is manually wrapped around the tree, making each tree shine uniquely for the upcoming Christmas celebration! The Christmas tree can be used across different scales or independent of scale considerations.Height: 2.9 cm.

€31.95*

available

Stk

5210 Colour light signal control module

Suitable to connect all scales of Viessmann standard colour light signals. With this module you can control the aspects of colour light signals without using relays. Optional connection of one signal with more aspects or two signals with 3 aspects. Special technology allows prototypical smooth changing of the signal lights. Optional blanking (distant signal switched off while main signal on the same mast shows “stop” position). One control module replaces up to 7 relays which are required with conventional technology. Without train control, so best used with computer-controlled digital layouts. Controlled by push-button panels items 5546 or 5547, single switch, track contacts or digital decoders are possible.

€83.50*

available

Stk

5320 Commander 2

The comfortable, versatile command station for NMRA-DCC and Märklin (Motorola old/new and MFX driving mode) systems. Setup and control via smartphone or tablet (not included). Innovative track plan navigation with the camera of the smartphone/tablet. Locomotive and accessory control with the full utilization of the supported digital protocols. 2 speed control knobs with separate direction buttons, feedback via s88, Railcom detectors on the main and programming outputs. Connections to additional boosters and Loconet. Colourful track plan in various zoom levels, including signals, turnouts, locomotive identifiers, and indicators for track occupancy and automatic routes. Clock with adjustable speed. Programming track output and integrated booster (4/5 A, adjustable for large gauges). Connection with tablet or PC via LAN/WLAN. HDMI-output for monitor or beamer and USB for mouse and keyboard. Incl. power supply unit. Suitable operating systems of the smartphone/tablet: Windows, android, iOS.

€649.95*

currently not available

Go to retailer search

5221 Control module for colour light block signal

Useable for all 2-aspect colour light main signals (block signals) and light block signals with LED lighting scale 0 up to Z (except signals with multiplex-technology). The module provides the block signal aspects Hp0 and Hp1. Authentic smooth switch of signal aspects. Integrated contact for train control. With stop showing signal the track in front of the signal is switched off. Control by universal push-button panel item 5547, single button, switching tracks, track contacts or digital magnet decoder. Additional output to control distant signal by control module item 5220.

€35.50*

available

Stk

5223 Control module for colour light departure signal

Useable for all 4-aspect colour light departure signals scale 0 to Z (except signals with multiplex-technology). The module provides all 4 block signal aspects (Hp0, Hp1, Hp2 and Sh1). Authentic smooth switch of signal aspects. Integrated contact for train control. By stop showing signal the track in front of the signal is switched off. Control by universal push-button panel item 5545, single button, switching tracks, track contacts or digital magnet decoder. Additional output to control distant signal by control module item 5220.

€58.50*

available

Stk

5220 Control module for colour light distant signal

Useable in connection with control modules for colour light signals items 5221 – 5223 and hobby light signals, item 4021, 4022. The module offers 3 possible distant signal aspects (Vr0, Vr1 and Vr2). Authentic smooth switch of signal aspects. By masking the stop showing home signal fixed on the same mast the distant signal is switched off.

€31.95*

available

Stk

5222 Control module for colour light entry signal

Useable for all 3-aspect colour light entry signals scale 0 to Z (except signals with multiplex-technology). The module provides all 3 entry signal aspects (Hp0, Hp1 and Hp2). Authentic smooth switch of signal aspects. Integrated contact for train control. With stop showing signal the track in front of the signal is switched off. Control by universal push-button panel item 5546, single button, switching tracks, track contacts or digital magnet decoder. Additional output to control distant signal by control module item 5220.

€46.95*

available

Stk

5224 Control module for colour light signals digital/analogue

The module offers an integrated digital decoder (Märklin-Motorola, NMRA-DCC) and is used to control 2 colour light signals (one home signal and one distant signal) with LEDs and a common plus pole or bulbs, provided they do not draw more than 200 mA in total. Therefore, it is suitable for all signal scales 0 up to Z (except for the Viessmann signals with multiplex-technology). It can be activated in conventional mode via the push-button panels items 5545, 5546 and 5547 or via a digital signal. It is equipped with Viessmann Signalbus and can be configured for the following applications:- 2 or several aspect colour light signal: A 2-aspect home signal with the aspects proceed and stop requires the push-button panel item 5547 (for 4 signals) or a digital address. A signal with 3 or 4 aspects with the additional aspects proceed slowly and shunting permitted requires the push-button panel item 5546 (3-aspect, 2 signals) resp. item 5545 (4-aspect, 2 signals) resp. a digital operation 2-aspect.- Distant signal or block signal: When configured as a block signal the module responds automatically to the status of the corresponding track sector. This works only in conjunction with track occupancy detectors with continuous output. Per signal sector up to 2 track sectors are required. In this mode the module changes automatically to proceed if the following sector is clear (unoccupied). If one of the two sectors is occupied, the module switches to stop. - Own distant signal or distant signal on the same mast: The signal module controls the main signal and the corresponding distant signal or the distant signal of a following main signal mounted on the same mast. In that case the distant signal will show the dark aspect when the main signal shows stop. - Interrupt track supply or switch on brake generator when stop aspect is shown: With the relay for automatic train control item 5228 the module can stop trains automatically either by interrupting the track voltage in front of the signal or – more prototypical – with the digital brake module item 5232 (Märklin Motorola) or a brake generator (for NMRA DCC). This makes it possible in both analogue and digital mode to control the track by sections.Signal with aspects stop and proceed slowly: If required you can configure the module to permit these two aspects only. In that case the module can be activated via the push-button panel item 5547 or a digital address. Regardless if the module is triggered by push buttons or track contacts the logic always assures that the red button has preference if two or more devices provide conflicting commands.

€68.95*

available

Stk

5302 Coupler **discontinued**

The coupler connects your digital command station with the Viessmann Commander. It detects the track signals from the station and sends information to the commander. Suitable for Motorola and DCC stations. So all track-, switch- and operation commands are transmitted to the station. LSB-cable is included.

€102.95*

few Available

Stk

5235 Decoder for C-Track, 3-way

Same as item 5231, single track decoder but for a Märklin C-track, three-way turnout. Controls 2 drives. Decoder can be controlled by loc addresses and can thus be used for driving devices unable to address switching decoders (such as the early Mobile Station and Roco Lokmäuse). Suitable for Märklin-Motorola, NMRA-DCC and Märklin systems.

€64.95*

available

Stk

5232 Digital brake module

The digital brake module provides prototypical slow starts and stops in front of a stop signal. Operating with all locomotive decoders, which support the Märklin braking track (Viessmann locomotive decoders, a lot of Märklin locomotive decoders and even more manufacturers). Special technology provides easy connection and compatibility with bidirectional operation. When stopping at the signal the light in the vehicles remains switched on.

€57.50*

available

Stk

52292 Double multiplexer for 2 colour light signals with multiplex-technology

Control module with integrated digital decoder (MM/ DCC) is for 2 Viessmann home signals with multiplex-technology, e. g. Ks-signals items 4042 – 4046 and standard light signals items 4721 – 4728 and is the best control for Viessmann signal bridge item 4750 equipped with signal heads items 4750 – 4753. The module controls 2 independent home signals and automatically identifies the connected signals. In case that home- and distant signal are one unit (Hp/Vr- combination), the signal heads can be controlled separately with an own address. Block distances operation with track control. Viessmann SpeedBus (LSB) provides comfortable connection with Viessmann Commander. Connected signal is recognized and configurated accordingly. Module has no Signalbus but offers control of distant signal by free addresses. The module recognizes the task of home signal and controls the distant signal. Connection of the signal is done by only one track connection. Smooth change of lighting between the signal pictures and more features are adjustable. For automatic train control item 5227 relay, double, monostable, 2 x 2UM direct connection is possible.

€82.95*

currently not available

Stk

5552 Electronic relay 2 x 2UM

2 separate bistable relays, each with 2 contacts. The relays have no time limits but can be used with continuous current. To control colour light signals and semaphore signals, barriers, block- and train change automatic and so on. Control by positive switching impulses resp. by continuous current or AC. Power consumption: 2 x 14 mA. Maximum load for each contact: 2 A.

€37.95*

available

Stk

5020 Electronic welding light

With this module the attached blue LED will flicker, so that it seems to be a real welding light. Realistic effect by integrated interval switch which interrupts the flickering automatically with breaks. Suitable for all kind of scales. Ideal to insert into depots, workshops, e. g. factory buildings. Maintenance free by LED lighting.

€23.95*

available

Stk

5236 Extension cable for multiplexer, 1m

4-pole extension cable to connect multiplex colour light signals and the control module multiplexers items 5229 and 52292. Length: 1 m.

€10.50*

available

Stk

5230 Extension cable for s88-Bus, 1,5 m

Suitable for feedback decoder items 5217 and 5233, Viessmann Commander, Märklin s88 and Uhlenbrock Intellibox. Can be connected to an existing cable. This is a genuine cable extension.

Content: 1.5 m (€13.67* / 1 m)

€20.50*

available

Stk

5234 Extension module for track occupancy detector

Rail segments which are not monitored by timer track stop item 5208 or occupancy detector item 5233 should be supplied by this small module. It avoids the loss of feedback which could arise when rail vehicles drive across the insulations between the monitored and non-monitored rail segments. It also ensures that the voltage drop caused by the sensors of item 5233 is transferred to the non-monitored track, otherwise the trains would lose their speed when traversing between the rail segments.

€10.50*

available

Stk

5217 Feedback decoder for s88-Bus

Compatible with the s88. The feedback decoder can be used with the Märklin Interface, the Märklin Memory, Uhlenbrock Intellibox and Viessmann Commander. The 16 inputs of the module for track occupancy detection or for starting memory-switch sequences can be connected to the track contacts item 6840 or with Märklin K-and C-tracks directly to the contacts track section. Attached is a 15 cm length special cable and original s88 plugs. For 2 rail tracks the track occupancy detector item 5233 is recommended.

€99.95*

available

Stk

5233 Feedback decoder with track occupancy detector

Compatible with Viessmann Commander, Märklin digital systems (Märklin-Interface and Memory), Uhlenbrock Intellibox and Fleischmann Twin-Center. The 8 inputs of the decoder can be connected directly to the rail segments and are suitable for displaying the occupancy of the segments or to trigger Märklin Memory- or Intellibox. IB-switch functions and routes in the commander are directly connectable to the controlled track sections. The integrated electronic sensors can detect any vehicle which consumes current (locomotives, coaches equipped with lights or with resistors) on the isolated rail segments. FFor this purpose the middle rail of a 3-rail system, or one of the rails of a 2-rail system has to be isolated. Optocouplers in the module increase the reliability of operation. Track voltage is supervised, so the occupancy information is preserved even after a blackout. A 15 cm long flat cable with s88 plug is attached.

€85.95*

available

Stk

Specialist dealer search

Download Center

Service / Help

Experience since 1988

Electronic