Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.Suitable retrofit kit Sound: item 8454L 18 x W 3.3 x H 3.3 – 5.2 cm
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer.Contents: 6 rubber wheels, 6 rims, 3 steel axles, 6 sockets.Suitable for trailer and semitrailer with up to 3 axles and single tyres.
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: DOLL 3-axle dolly.L 21.5 x W 3.5 x H 3.9 cm
The speed is adjustable and 2 functions are switchable. Function A: The outputs are switched in succession. So either one lamp or one LED is lit at the time. Function B: The outputs are switched on in succession and switched off all at once. Best use for advertising lighting.
The blaze flickering generates a realistic fire effect of a blazing fire. Up to 7 red and yellow miniature bulbs all flicker in a different rhythm, suggesting to the observer the striking effect of a real burning fire. The intensity can be adjusted steplessly to suit the specific application and your own desire. The following applications are possible: Burning houses, camp fires (in the forest, by the lake), stoves etc. The set includes 2 yellow and 1 red bulbs. It is possible to upgrade to 7 bulbs items 3501 (yellow), 3502 (red) and 3503 (clear). Useable with camp fire item 5022.
This unique Christmas tree, crafted through 3D printing, impresses with its delicate branches adorned with hand-painted golden ornaments and a lifelike colourful string of lights. Just like the original, the string of lights is manually wrapped around the tree, making each tree shine uniquely for the upcoming Christmas celebration! The Christmas tree can be used across different scales or independent of scale considerations.Height: 2.9 cm.
With this module the attached blue LED will flicker, so that it seems to be a real welding light. Realistic effect by integrated interval switch which interrupts the flickering automatically with breaks. Suitable for all kind of scales. Ideal to insert into depots, workshops, e. g. factory buildings. Maintenance free by LED lighting.
Electronic circuitry for realistic operation of Viessmann fluorescent lighted lamps in all scales. Useable with LED lights, too. After switching on, the fluorescent tubes flicker for a prototypical time until they all reach full output and burn uniformly. Each lamp operates slightly differently. At one of the outputs a defect fluorescent lamp can be simulated. This tube will flicker in irregular intervals, sometimes lighting up quickly and other times very slowly. 5 separate outputs with different starting patterns. Each output can drive 3 lamps. We recommend connection of only one lamp to each output, since no 2 lamps will ever operate exactly the same way in reality. Switching on / off is effected via a separate momentary action switch, e. g. push-button panel item 5547.
Traffic lights suitable for epochs III - VI. Each set contains 2 traffic lights, each with a red, yellow and green LED for road traffic and a red and green LED for pedestrians. Suitable for crosswalks as e. g. zebra crossings. Prototypical filigree brass mast with base socket for easy mounting. Maintenance free by LED lighting. Attached electronics controls both traffic lights in an automatic sequence. Height: 7,8 cm.
Using campfire it is possible to create nice romantic twilight effects. To show an Easter fire or BBQ fire. Campfire is equipped with 2 yellow bulbs. Together with the blaze flickering electronics item 5021 you can connect up to 7 yellow bulbs and one red bulb. Dimensions: Ø 2,8 cm. Spare bulb: items 3501 (yellow) and 3502 (red).
Finished model. This state-of-the-art milling machine made by Swiss manufacturer DMG convinces by a 25-fold tool exchanger, max. 24 000 RPM of the main spindle and 3, 4 or 5 axles, acc. to the model. Dimensions: L 2,7 x W 1,9 x H 2,9 cm.
Coach lighting with maintenance free, bright LEDs. Brightness adjustable by potentiometer. Can be used in any lighting prepared coaches of all manufacturers. By shortening the circuit board, it can be adapted to various waggon lengths. Constant power supply integrated, prepared for flicker-protection. Power supply by grinder / point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Maximum power input 38 mA. Dimensions: L 25,4 x W 0,7 cm.
Coach lighting with maintenance free, power-saving, bright LEDs with integrated multi protocol decoder (Motorola/DCC). Brightness adjustable by CVs and potentiometer. Can be used in any coach of all manufacturers designed to be equipped with lighting. By shortening the circuit board, it can be adapted to various waggon lengths. Integrated flickering protection for constant light even with short interruptions of the voltage supply, additional capacitors/power packs can be connected. Various lighting effects are adjustable, as start-up simulation of track bed inverter or single flickering tubes. The model offers direction depending switching outputs for front- and rear lighting. An additional switching output up to 150 mA capacity completes the functionalities. Power supply by grinder/point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Due to low-loss switching regulator the coach lighting warms up only a bit. Maximum power input 20 mA. Dimensions: L 25,4 x W 0,8 cm.
Coach lighting with maintenance free, bright LEDs. Brightness adjustable by potentiometer. Can be used in any lighting prepared coaches of all manufacturers. By shortening the circuit board, it can be adapted to various waggon lengths. Constant power supply integrated, prepared for flicker-protection. Power supply by grinder / point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Maximum power input 38 mA. Dimensions: L 25,4 x W 0,7 cm.
Coach lighting with maintenance free, power-saving, bright LEDs with integrated multi protocol decoder (Motorola/DCC). Brightness adjustable by CVs and potentiometer. Can be used in any coach of all manufacturers designed to be equipped with lighting. By shortening the circuit board, it can be adapted to various waggon lengths. Integrated flickering protection for constant light even with short interruptions of the voltage supply, additional capacitors/power packs can be connected. Various lighting effects are adjustable, as start-up simulation of track bed inverter or single flickering tubes. The model offers direction depending switching outputs for front- and rear lighting. An additional switching output up to 150 mA capacity completes the functionalities. Power supply by grinder/point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Due to low-loss switching regulator the coach lighting warms up only a bit. Maximum power input 20 mA. Dimensions: L 25,4 x W 0,8 cm.
Coach lighting with maintenance free, bright LEDs. Brightness adjustable by potentiometer. Can be used in any lighting prepared coaches of all manufacturers. By shortening the circuit board, it can be adapted to various waggon lengths. Constant power supply integrated, prepared for flicker-protection. Power supply by grinder / point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Maximum power input 38 mA. Dimensions: L 25,4 x W 0,7 cm.
Coach lighting with maintenance free, power-saving, bright LEDs with integrated multi protocol decoder (Motorola/DCC). Brightness adjustable by CVs and potentiometer. Can be used in any coach of all manufacturers designed to be equipped with lighting. By shortening the circuit board, it can be adapted to various waggon lengths. Integrated flickering protection for constant light even with short interruptions of the voltage supply, additional capacitors/power packs can be connected. Various lighting effects are adjustable, as start-up simulation of track bed inverter or single flickering tubes. The model offers direction depending switching outputs for front- and rear lighting. An additional switching output up to 150 mA capacity completes the functionalities. Power supply by grinder/point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Due to low-loss switching regulator the coach lighting warms up only a bit. Maximum power input 20 mA. Dimensions: L 25,4 x W 0,8 cm.
Double-sided illuminated sign with LED, maintenance free. Suitable e. g. for stations. DB-logo is exchangeable. Offered with 3 different types of printing: 1956 – 1986, 1986 – 1994, as of 1994. Suitable for kibri item 39256 H0 Maintenance hangar Deutsche Bahn, modern. Dimensions: L 1,67 x W 0,33 x H 1,19 cm.
Destination display epochs IV – V with double-sided display. Maintenance free by LED lighting. For mounting under a platform top or laterally, e. g. on a mast. Prefabricated paper sheets for marking are attached. On our website www.viessmann-modell.de you will find a programme in the download center with which you can create your own labels. Dimensions: L 2,15 x W 0,8 x H 1,1 cm.
Maintenance free by LED lighting. To be mounted under the ceiling. Perfectly fitting kibri item 39250, Warehouse / Industrial hall, modern. Ø 0.7 x H 0.4 cm.