This practical accessory set includes a remote control, 10 meters of magnetic tape (0.5 mm), 10 permanent magnets, as well as a charger and a programming device.

currently not available

The background settings for maximum optical enlargement of your layout.

available

The background settings for maximum optical enlargement of your layout.

available

The background settings for maximum optical enlargement of your layout.

available

Lightweight, high-performance, and compact LiPo pouch cells with built-in protection electronics against overcharging, deep discharge, and overcurrent (short-circuit resistant). Replacement part for MB Actros vehicles, designed for operations with the cells connected in parallel.Nominal voltage 3.7 V, capacity each 60 mAh, maximum charge and discharge current 2 C (120 mA).L 22 x W 12 x H 4.5 mm

available

Lightweight, high-performance, and compact LiPo pouch cell with built-in protection electronics against overcharging, deep discharge and overcurrent (short-circuit resistant). Replacement parts for MB round bonnet and Magirus square bonnet vehicles.Nominal voltage 3.7 V, capacity 120 mAh, maximum charge and discharge current 2C (240 mA).L 24 x W 12 x H 7.5 mm

available

The car detector recognizes the steering magnet of passing vehicles and is installed beneath the magnetic tape or conductive wire. Exclusively designed for use with the IR module item 8403, the InduktivCharger (item 8408) and the speed cameras (items 1330, 1331 and 1332).

currently not available

This module is ideal for designing a wide variety of model scenes. It can, e. g. serve as a connecting element or a thematic intermediate segment that integrates seamlessly into a larger layout.Features include a pre-milled groove for 1 mm magnetic tape, item 8430 and breakout holes for the InduktivCharger, item 8408 or turnout, items 8445/8448.Supplied with acrylic glass panels for edging.L 90.0 x W 54.0 x H 10.0 cm

currently not available

Kit. Prototype data: 4-axle motor PLASSER & THEURER motor tower vehicle type MTW 100.083/1 for mounting of catenary systems, maintenance and inspection of overhead lines and for the transport of people and material. With NEM shaft.Lob 19.1 x W 4.0 x H 6.0 cmLevel of difficulty: 2 (advanced)

available

The charger is specifically designed for smaller vehicles such as the Beetle, item 8090 and is optimally matched to the charging current of their batteries. It features the appropriate connector for these vehicle models.

currently not available

The charger for the trucks and buses of the Viessmann CarMotion system can be powered by any commercially available USB power supply unit or by almost any device such as PC, laptop, power bank etc. With the enclosed cable, the charger can be connected to a USB-A power supply. The charger’s plug just needs to be inserted into the socket underneath the CarMotion vehicle. An empty battery is recharged within 35 minutes. A partially discharged battery requires correspondingly less time to be recharged. The current charging status of the vehicle during the charging process is indicated by the interior lighting of the vehicle flashing in 4 steps.

currently not available

Robust, low-noise drive unit designed for the motorization of the manually operated 2/3-way turnout (item 8445). Featuring a powerful 10 mm motor and planetary gear, it ensures secure positioning movements. By rearranging the variable end stops, a flexible creation of left, right, or 3-way turnout configurations is possible. The compact electronics are integrated into the housing. Control can be executed manually, via buttons/switches or the InduktivCharger (item 8408), enabling digital control. Like the vehicles, the drive unit can be comfortably configured in the CarManager.

currently not available

Cable for extending the EasyChain line for the InduktivCharger, item 8408. Ideally suited for lengthening the EasyChain line and connecting remote InduktivChargers. Length: 0.5 m per cable

available

This cable is designed for extending the 6-pin connector of the programming device, item 8401, or the charger, item 8400. Ideal for wiring hard-toreach modules, such as the IR Mini, item 8403.

available

Dimensions: L 28,7 x W 11 x H 9 cm.

available

The trailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer:• Infrared transmitter for distance control• Braking and reversing lights• Direction indicators right/left and warning lights controllableL 8.2 x W 2.9 x H 3.2 - 6.4 cm

available

The trailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer:• Infrared transmitter for distance control• Braking and reversing lights• Direction indicators right/left and warning lights controllableL 8.2 x W 2.9 x H 3.2 – 6.4 cm

available

The trailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer:• Infrared transmitter for distance control• Braking and reversing lights• Direction indicators right/left and warning lights controllableL 9.8 x W 3 x H 2.7 cm

currently not available

Kit. Inland container Htt 6/251. More and more containers are used for consolidated transports on streets, tracks and water.L 7.0 x W 2.8 x H 3.0 cm Level of difficulty: 1 (beginners)

available

Dimensions: L 5 x W 1,25 x H 0,2 cm.

available

Dimensions: L 0,8 x W 1,3 x H 0,3 cm.

available

The trailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer:• Infrared transmitter for distance control• Braking and reversing lights• Direction indicators right/left and warning lights controllableL 12.3 x W 3 x H 3.6 cm

currently not available

The semitrailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer:• Infrared transmitter for distance control• Braking and reversing lights• Direction indicators right/left and warning lights controllableL 10.9 x W 2.8 x H 4 cm

currently not available

The trailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer:• Infrared transmitter for distance control• Braking and reversing lights• Direction indicators right/left and warning lights controllableL 9.3 x W 2.8 x H 4.2 cm

currently not available