Overhead Line
Topseller
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.Suitable retrofit kit Sound: item 8454L 18 x W 3.3 x H 3.3 – 5.2 cm
currently not available
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer.Contents: 6 rubber wheels, 6 rims, 3 steel axles, 6 sockets.Suitable for trailer and semitrailer with up to 3 axles and single tyres.
available
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: DOLL 3-axle dolly.L 21.5 x W 3.5 x H 3.9 cm
currently not available
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
With 2 electrically insulated beams, filigree metal work. Middle crossarm: 3,4 cm. Height: 9,8 cm.
available
Suitable for all Viessmann H0 catenary masts. Middle crossarm: 4,4 cm.
available
Suitable for all Viessmann H0 catenary masts. Middle crossarm: 2,6 cm.
available
Suitable for all Viessmann H0 catenary masts. Middle crossarm: 3,4 cm.
available
For the universal installation on all model bridges. Mast in filigree metal work with Märklin bridge support as well as universal holder and beam. Delivery without bridge model. Middle crossarm: 3,4 cm. Height: 9,9 cm.
available
For universal operation with bent catenary contact wires, e. g. in point areas. Length: 7 cm.
available
Filigree metal work with stamped rivet imitations. Suitable for the mounting of the tensioning pulley item 4173 and tensioning lever item 4174. Height: 11,5 cm.
available
Catenary system for one oval track (184 cm x 84 cm), consisting of 24 standard masts item 4110, 4 middle masts item 4112, 9 catenary wires 36 cm of item 4143, 7 catenary wires 17.25 cm of item 4132, 16 catenary wires 14.2 cm of item 4133, 2 contact wires equalizing pieces item 4139 and equalizing pieces item 4139 and one height marker, item 4196. To use the catenary system as a power supply, the following additional items are required: Power mast item 4111, fuse holder item 4188 with fuses, and Y-wires item 4170 which ensure a reliable connection between the wires. Compatible with Märklin digital starter set ICE2, item 29792.
available
Consisting of transformer, console, feed cables, insulators and mast switch. Suitable for the mounting on the following Viessmann tower masts: Items 4114, 4115, 4116, 4117. Suitable suspended box girders items 4160, 4161. Corresponding spanbridges items 4162, 4163.
available
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for Fleischmann Model track (radius 357 mm), Fleischmann Profi-track (radius 356,5 mm) and Roco LINE + Roco geoLINE (radius 358 mm).
available
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for Märklin C-track, Märklin K-track and Märklin M-track (radius 360 mm).
available
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for Tillig H0-Elite (radius 366 mm).
available
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for Fleischmann Model-track (radius 415 mm).
available
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for Fleischmann Profi-track (radius 420 mm) and Roco LINE + Roco geoLINE (radius 419,5 mm).
available
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for Märklin K-track (radius 424,6 mm) and Tillig H0-Elite (radius 425 mm).
available
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for Märklin C-track (radius 437,5mm), Märklin M-track (radius 437,4 mm) and Roco LINE + Roco geoLINE (radius 172,5 mm).
available
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for Fleischmann Profi-track (radius 483,5 mm) and Roco LINE + Roco geoLINE (radius 481,2 mm).
available
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for all track systems.
available
Special catenary contact wire piece for easy spanning of crossroads, ready-to-install. Length: 13,7 cm.
available
Special catenary contact wire piece for spanning of double slip switches, ready-to-install. Length: 13,7 cm.
available
The catenary contact wire is equipped with parallel running out ends and so best useable to tension with Viessmann tensioning catenary e. g. items 4174 and 4173.
available
With beam, filigree metal work. Middle crossarm: 4 cm. Height: 9,85 cm.
available
Ready-to-install catenary wire to connect the previous Märklin catenary with Viessmann catenary.
available
For the universal fixing of catenary masts, electronic boxes and more.
available
Spur H0 Oberleitung – Funktionale Oberleitungen für H0-Modelleisenbahnen
Elektrifizierte Bahnstrecken gehören zum Bild moderner Eisenbahnlandschaften – und ebenso auf jede realistisch gestaltete Modelleisenbahn. Mit der Spur H0 Oberleitung von Viessmann bringen Sie Ihre Modellbahn nicht nur optisch auf das nächste Level, sondern ermöglichen auch den funktionalen Betrieb von E-Loks über echten Fahrdraht. Maßstabsgetreu, robust und detailreich – so sieht echte Modellbahntechnik aus.
Viessmann Oberleitungssystem für Spur H0 – detailgetreu & zuverlässig
Viessmann bietet Ihnen ein modulares Oberleitungssystem für Spur H0 (Maßstab 1:87), das sich flexibel an jede Gleisgeometrie anpassen lässt. Die Komponenten sind exakt aufeinander abgestimmt und basieren auf den Vorbildern der Deutschen Bahn. Alle Masten, Ausleger, Quertragwerke und Fahrdrähte überzeugen durch filigranes Design, hohe Stabilität und einfache Montage.
Ob einfache Streckenführung oder komplexes Bahnhofsgleisfeld – mit Viessmann lassen sich alle elektrifizierten Strecken realistisch und funktionsfähig nachbilden.
Realistischer Betrieb mit echtem Fahrdraht
Das Viessmann-System ist nicht nur Dekoration, sondern voll funktionsfähig:
Die Oberleitungen können echten Strom führen und ermöglichen so den realitätsnahen Betrieb von E-Loks mit funktionierendem Stromabnehmer. In Kombination mit unseren robusten Fahrdrähten und isolierten Fahrleitungsanschlüssen entsteht ein sicheres und stabiles System für den Dauerbetrieb.
Dank cleverer Verbindungstechnik sind sowohl feste Anlagen als auch transportable Modulbahnen problemlos realisierbar.
Das H0-Oberleitungsprogramm im Überblick
Unser Sortiment für Spur H0 bietet Ihnen alles, was Sie für eine funktionierende Oberleitungsanlage benötigen:
- Fahrleitungsmasten in verschiedenen Bauformen
- Einfach- und Doppelausleger für ein- und mehrgleisige Strecken
- Quertragwerke und Portale für Bahnhöfe & Hauptstrecken
- Flexibler Fahrdraht in verschiedenen Längen
- Isolatoren, Abspannungen & Zubehör
- Montagehilfen und Werkzeuge für perfekte Installation
Durch das vielfältige Zubehör lässt sich die Oberleitung individuell anpassen und jederzeit erweitern – für einen absolut authentischen Gesamteindruck.
Machen Sie Ihre H0-Anlage elektrisch lebendig – mit der funktionalen Oberleitung von Viessmann. Entdecken Sie jetzt unser umfassendes Sortiment für den realistischen Oberleitungsbau und genießen Sie Modellbahntechnik auf höchstem Niveau.