Railroad Crossing
Topseller
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.Suitable retrofit kit Sound: item 8454L 18 x W 3.3 x H 3.3 – 5.2 cm
currently not available
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer.Contents: 6 rubber wheels, 6 rims, 3 steel axles, 6 sockets.Suitable for trailer and semitrailer with up to 3 axles and single tyres.
available
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: DOLL 3-axle dolly.Suitable retrofit kit Sound: item 8456L 21.5 x W 3.5 x H 3.9 cm
currently not available
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
With 2 electrically insulated beams, filigree metal work. Middle crossarm: 3,4 cm. Height: 9,8 cm.
available
Dimensions: L 5 x W 1,25 x H 0,2 cm.
available
Dimensions: L 0,8 x W 1,3 x H 0,3 cm.
available
Dimensions: L 5 x W 1,25 x H 0,2 cm.
available
Dimensions: L 8.0 x W 1.3 x H 0.3 cm.
available
To extend barrier arms of item 5100. Consisting of one piece each 2R connector and 3R connector, each 6 red and white extensions, 2 ramps, 4 ramp feet and 2 balance springs.
available
Level crossing with 2 barriers, powered by 2 separate underfloor drive units. The drive provides slow movement during opening and closing of the barriers. The street can cross an unlimited number of tracks. Board crossing pieces, access ramps and printed road signs are attached. Integrated decoder is multi protocol and recognizes DCC and MM format. For automatic use switching tracks resp. switching contacts item 6840 are required. More connectors offered with item 5105 (2 rail version) and item 5106 (3 rail version). When used with CarMotion, adjustments regarding the road width and the steepness of the ramp are necessary, as well as the installation of magnetic tape, since this product was not originally designed for CarMotion.Suitable sound module: Item 5556. Barrier length: ca. 6,3 cm.
available
Level crossing with 2 barriers, powered by 2 separate underfloor drive units. The drive provides slow movement during opening and closing of the barriers. The street can cross an unlimited number of tracks. Board crossing pieces, access ramps and printed road signs are attached. Integrated decoder is multi protocol and recognizes DCC and MM format. For automatic use switching tracks resp. switching contacts item 6840 are required. More information is provided in our signal book item 5299 German version. To build four-arm barriers, item 5107 model with mirrored imprint is required. More connectors offered with items 5105 (2 rail) and 5106 (3 rail). When used with CarMotion, adjustments regarding the road width and the steepness of the ramp are necessary, as well as the installation of magnetic tape, since this product was not originally designed for CarMotion.Suitable sound module: item 5556. Barrier length: ca. 6,3 cm.
available
With mirrored printing to build a four-arm barrier in connection with item 5104. Level crossing equipped with 2 underfloor drive units. When used with CarMotion, adjustments regarding the road width and the steepness of the ramp are necessary, as well as the installation of magnetic tape, since this product was not originally designed for CarMotion.Suitable sound module: item 5556. For technical details see item 5104.
available
Level crossing with 2 barriers, powered by 2 separate underfloor drive units. Slow movement during opening and closing of the barriers. Track filling pieces, ramps and printed traffic signs are attached. Upgradable with extension set item 5103. For automatic use additional switching-tracks resp. reed contacts item 6840 are required. For double tracks even an electronic relay item 5552 is required. More connectors are available with items 5101 (2 rail version) and 5102 (3 rail version). When used with CarMotion, adjustments regarding the road width and the steepness of the ramp are necessary, as well as the installation of magnetic tape, since this product was not originally designed for CarMotion.Suitable sound module: item 5556. Length of barrier arms: ca. 4,3 cm.
available