Stone Art
Under this motto, Vollmer offers wall panels, road panels, tunnel portals and much more made of a mineral composite material in H0, TT, N, 0 and G gauges.
This material creates an unrivalled realistic stone surface. The panels are flexible and can be easily cut to size with a cutter knife. The thicker and stiffer wall panels can also be bent - by heating them slightly with hot air - and adapted to any curvature of the ground and earth.
Topseller
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.Suitable retrofit kit Sound: item 8454L 18 x W 3.3 x H 3.3 – 5.2 cm
currently not available
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer.Contents: 6 rubber wheels, 6 rims, 3 steel axles, 6 sockets.Suitable for trailer and semitrailer with up to 3 axles and single tyres.
available
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: DOLL 3-axle dolly.L 21.5 x W 3.5 x H 3.9 cm
currently not available
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
With 2 electrically insulated beams, filigree metal work. Middle crossarm: 3,4 cm. Height: 9,8 cm.
available
The asphalt plate from the stone art series consists of weather resistant mineral composite. This material creates an unmatched realistic stone surface. The plates are flexible and can be easily cut with a knife. Due to the plate size particularly versatile usable, e. g. for a construction yard, parking or industrial area. Also suitable for street plates, items 48260 – 48267.L 42 x W 29.7 cm
Content: 0.1247 qm (€228.55 / 1 qm)
available
The Asphalt street from the stone art series consists of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The street is flexible and can be easily cut with a knife. The street comes with 2 manhole covers and 2 canal lids. By light warming up using hot air the material gets flexible and uneven ways are possible to adjust.
Content: 0.75 m (€34.00 / 1 m)
available
The cobblestone plate from the stone art series consists of weather resistant mineral composite. This material creates an unmatched realistic stone surface. The plates are flexible and can be easily cut with a knife. Due to the plate size and the straight laying of the stones particularly versatile usable, e. g. for a market place. Also suitable for cobblestone plates item-No. 48240 – 48247. Dimensions: L 28 x W 16 cm.
Content: 0.045 qm (€576.67 / 1 qm)
available
The deco-set of the stone art series consists of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The set contains 6 tombs and is universally applicable, e. g. for the Vollmer cemeteries item-No. 43860 and 43861.
available
This sub-construction of the stone art series can be cut individually. Offers you to place subsequently buildings on a mountain side on your layout. Suitable for all common model buildings. Dimensions: L 21 x W 0,2 x H 5,6 cm.
available
This pavement of the stone art series consists of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The pavement with 90°-angle fits to corner houses and the surface is designed in concrete appearance. Dimensions: L 10,9 x W 10,9 x H 0,2 cm.
available
The polygonal plates from the stone art series consist of weather resistant mineral composite. This material creates an unmatched realistic stone surface. The plates can be joined together seamlessly without visible gaps. They are flexible and can be easily cut with a knife. Dimensions: L 27,5 x W 16 cm.
Content: 0.044 qm (€430.68 / 1 qm)
available
The retaining walls from the stone art series extend the tunnel portal item No. 48100 to the left and right side. A lifelike tunnel entrance is created. Dimensions: L 13,7 x W 0,8 x H 11 cm.
available
The roof plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The plates are flexible and can be easily cut with a knife.
Content: 0.0456 qm (€327.85 / 1 qm)
available
The manhole covers from the stone art series consist of weather resistant sediment composite. Suitable for the street plates, items 48260 – 48267 and perfect for hiding the Viessmann permanent magnets, item 8431 from the CarMotion series.Durchmesser: 1 cm
available
Optimally suited for road widening for the use of CarMotion vehicles from Viessmann.L 18.5 x W 2 cm.
available
Optimally suited for road widening for the use of CarMotion vehicles from Viessmann.L 31.0 x W 2 cm.
available
This side-strip with lay-by of the stone art series consists of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Universally applicable. The surface of the pavement is created in concrete appearance. The area near the pavement is individually plantable. The length of the parking bay is suitable for buses to drive in and out. The installation of the InduktivCharger is possible due to the width.L 32 x W 6.6 x H 0.2 cm
Content: 0.0211 qm (€1,419.43 / 1 qm)
currently not available
This side-strip with lay-by of the stone art series consists of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Universally applicable. The surface of the pavement is designed in concrete appearance. The area near the pavement is individually plantable. The lay-by is suitable for one car. L 27,3 x W 6,6 x H 0,2 cm.
available
This side-strip with lay-by of the stone art series consists of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Universally applicable. The surface of the pavement is created in concrete appearance. The area near the pavement is individually plantable. The lay-by is suitable for 3 cars or 1 bus. L 27,3 x W 6,6 x H 0,2 cm.
currently not available
This sidewalk from the Stone Art series is made of weatherproof sediment composite material. It forms the perfect connection between the parking bays, items 48250/48251/48252 and the 90° angled sidewalk, item 48253.Dimensions: L 25 x W 6.6 x H 0.2 cm.
Content: 0.0211 qm (€1,419.43 / 1 qm)
available
Kit.The stationary loading and unloading ramp for heavy-duty trucks (Märklin 48740), also known as a rolling highway, is a permanently installed ramp solution specifically designed for the safe loading and unloading of CarMotion vehicles.This ramp provides a stable and durable means of moving CarMotion vehicles onto and off heavy transporters, ensuring smooth and reliable logistics during transportation operations.A road surface made of Vollmer Stone Art asphalt is included with the ramp, offering maximum durability and slip resistance.Available as a white model for self-painting.Dimensions: L 7 x W 6.4 x H 2.9 cm
available
The Asphalt street from the stone art series consists of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The street is flexible and can be easily cut with a knife. The street is equipped at the bottom with a groove for the CarMotion magnetic tape, 0.5 mm, item 8429. By slightly warming up using hot air the material gets flexible and uneven ways are possible to adjust.The street comes with 2 manhole covers and 2 canal lids.L 75 x W 8 cm
currently not available
The Asphalt street from the Stone Art series consists of weatherproof sediment composite. This material creates an unmatched realistic stone surface. The street is flexible and can be easily cut with a knife. The street is equipped at the bottom with a groove for the CarMotion magnetic tape, 0.5 mm, item 8429.By slightly warming up using hot air the material gets flexible and uneven ways are possible to adjust.L 15 x W 11.5 cm
currently not available
The Asphalt street from the Stone Art series consists of weatherproof sediment composite. This material creates an unmatched realistic stone surface. The street is flexible and can be easily cut with a knife. The street is equipped at the bottom with a groove for the CarMotion magnetic tape, 0.5 mm, item 8429.By slightly warming up using hot air the material gets flexible and uneven ways are possible to adjust.L 15 x W 15 cm
currently not available
The street plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The plates are flexible and can be easily cut with a knife. Dimensions: L 38 x W 38 cm.
available
The street plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The plates are flexible and can be easily cut with a knife. Dimensions: L 20 x W 20 cm.
available
The street plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The plates are flexible and can be easily cut with a knife. Dimensions: L 23 x W 23 cm.
currently not available
The street plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The plates are flexible and can be easily cut with a knife.
available
Spur H0 Steinkunst – Naturgetreue Steinoptiken & Mauern für realistische Modelllandschaften
Ob massive Brückenpfeiler, historische Stadtmauern oder ländliche Trockenmauern – naturgetreue Steinstrukturen gehören zu den wichtigsten Gestaltungselementen in der Modellbahnwelt. Mit der Viessmann Steinkunst für Spur H0 verleihen Sie Ihrer Anlage ein Höchstmaß an Realismus, Textur und Tiefe. Die detailreich gestalteten Mauern, Portale und Steinoberflächen überzeugen durch eine authentische Optik, die sich nahtlos in jede Szenerie einfügt – von der Gebirgsstrecke bis zur Altstadt.
Detailtreue in Stein: Modellieren wie das Vorbild
Die Steinkunst-Elemente im Maßstab 1:87 basieren auf originalen Vorbildern und werden mit modernster Technik gefertigt. Dank aufwendiger Prägetechniken und farblicher Gestaltung entsteht eine realistische Steinstruktur mit fein nuancierten Oberflächen und naturgetreuen Fugenverläufen. Egal ob Sandstein, Basalt oder Ziegel – jede Mauer wirkt wie echt und verleiht Ihrer Modelllandschaft Tiefe und Charakter.
Viessmann Steinkunst – vielseitig einsetzbar
Mit der Steinkunst-Serie lassen sich vielfältige Szenen und Bauwerke umsetzen:
- Stützmauern entlang von Bahntrassen oder Straßen
- Tunnelportale und Bögen
- Brückenauflager und Viaduktpfeiler
- Stadtmauern, Terrassen und Gartenmauern
- Mauersysteme für Industrie- und Bahnhofsbereiche
Dank modularem Aufbau sind die Steinelemente flexibel kombinierbar, erweiterbar und individuell kürzbar. So passen sie sich perfekt an Ihre Gegebenheiten an – egal ob Gerade, Kurve oder Hanglage.
Hochwertige Materialien für langlebige Ergebnisse
Die Viessmann Steinkunst-Elemente bestehen aus speziell formulierten Kunststoffen oder Keramikmischungen, die besonders robust, farbecht und formstabil sind. Sie lassen sich leicht verarbeiten, bemalen oder altern, sodass auch individuelle Anpassungen problemlos möglich sind.
- Naturgetreue Farbgebung ab Werk
- Feine Gravuren und strukturierte Oberflächen
- Ideal für Wettereinflüsse und Alterungseffekte
- Leicht zu schneiden, kleben und anpassen
Qualität für Ihre Spur H0-Anlage
- Maßstabsgetreue Steinstrukturen (1:87)
- Große Auswahl an Mauerformen, Portalen und Zubehör
- Realistische Farbgebung und Struktur für jede Epoche
- Einfache Verarbeitung und hohe Gestaltungsfreiheit
- Perfekte Ergänzung zu Gebäuden, Brücken und Landschaften
- Made in Germany – Qualität, die man sieht und fühlt
Gestalten Sie Ihre Modellbahnanlage mit echter Struktur – mit Viessmann Steinkunst für Spur H0. Entdecken Sie naturgetreue Mauern, Portale und Steinoberflächen für eine Landschaft, die überzeugt – in jeder Perspektive.