Construction Vehicles
Topseller
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.Suitable retrofit kit Sound: item 8454L 18 x W 3.3 x H 3.3 – 5.2 cm
currently not available
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer.Contents: 6 rubber wheels, 6 rims, 3 steel axles, 6 sockets.Suitable for trailer and semitrailer with up to 3 axles and single tyres.
available
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: DOLL 3-axle dolly.L 21.5 x W 3.5 x H 3.9 cm
currently not available
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
With 2 electrically insulated beams, filigree metal work. Middle crossarm: 3,4 cm. Height: 9,8 cm.
available
Kit. Prototype data: Weight approx. 35 t, engine power 169 kW/230 HP. Max. tearing force 195 kN/19.5 t, max. breakaway force 229 kN/22.9 t, bucket capacity 2 m³. An interesting excavator model to be used universally on small or large construction sites.L 7 – 16 x W 4 x H 4 – 12.5 cm Level of difficulty: 2 (advanced)
available
Kit. Prototype data: The JCB 4CX 4x4x4 shows superior performance at all duties in all terrain. 4 wheels equal in size improve the traction and provide excellent litre achievement. Equipped with a powerful 67.5 kW/91 HP turbo engine.L 10.0 x W 3.0 x H 3.5 cmLevel of difficulty: 2 (advanced)
available
Kit. Prototype data: Tandem roller type BW 170 AD, 4 cylinder Cummins diesel engine 4B 3.3, water-cooled, 53 kW/80 HP, weight 8 t, max. operating weight 9.5 t.L 5.0 x W 2.4 x H 3.8 cm Level of difficulty: 2 (advanced)
available
Kit. Prototype data: Tandem roller type BW 170 AD, 4 cylinder Cummins diesel engine 4B 3.3 – C, water-cooled, 53 kW/80 HP, weight 8 t, max. operating weight 9.5 t.L 6.5 x W 2.8 x H 3.8 cm Level of difficulty: 2 (advanced)
available
Kit. L 7.0 – 9.7 x W 3.7 x H 3.8 cm / L 7.0 x W 2.8 x H 3.8 cm. Level of difficulty: 2 (advanced)
few available
Kit. Prototype data: Working width 2.5 – 8.5 m, 6 cylinder DEUTZ diesel engine with 82 kW/112 HP. Max. weight 17.9 t.L 7.2 x W 3.0 – 5.0 x H 4.2 cm Level of difficulty: 2 (advanced)
available
Kit. Prototype data: Working width 2.5 – 8.5 m. 6 cylinder DEUTZ diesel engine with 82 kW/112 HP. Max. weight 17.9 t.L 7.2 x W 3.0 – 5.0 x H 4.2 cm Level of difficulty: 2 (advanced)
available
Kit. Prototype data: The 301 H hydraulic excavator is regarded as the father of the FUCHS hydraulic excavators which are worldwide still in use today. The basic machine, driven purely mechanically in the origin, was supplemented by a hydraulic system in the middle of the 1960s, which also permitted the use as a rope excavator.L 6.3 – 8.4 x W 2.8 x H 3.2 – 5.5 cm Level of difficulty: 2 (advanced)
available
Kit. Prototype data: In the early sixities the FUCHS company introduced the excavator types 300 and 301, which were widely disseminated. Until today some excavators survived as types of cranes and grippers. Used to transship wood, coal and scrap metal also in agriculture or at the railway the excavators are still doing their service. The version with increased cabin allows the driver the overview above high ship‘s sides or compartment walls.L 4.0 x W 3.0 x H 4.5 – 8.5 cm Level of difficulty: 2 (advanced)
available
Kit. L 6.0 x W 2.5 x H 3.2 cm Level of difficulty: 2 (advanced)
available
Kit. Prototype data: The KAELBLE-GMEINDER KK 25 is an all-wheel-driven dumper of high technical standard. Powered by a 6 cylinder SAAB-SCANIA diesel engine with 190 kW/259 HP, the dumper is the universal transport vehicle for every terrain. With a total weight of 41 t it can carry up to 15.5 m³ payload in the heatable tipper. The steering system is hydrostatic due to 2 hydraulic cylinders having an effect at the articulated joint. For action in terrain, transport on construction streets, loading or dumping, the advantages compared with traditional trucks become clearly visible. The max. speed is 53 km/h.L 11.2 x W 3.0 x H 4.0 – 7.0 cmLevel of difficulty: 2 (advanced)
available
Kit. Prototype data: The reliable bulldozers from KOMATSU are designed for a multitude of different types of earth movement. Engine power 784 kW/1066 HP, operating weight approx. 132 t, max. tractive force 1250 kN.L 15.0 x W 7.9 x H 5.6 cm Level of difficulty: 2 (advanced)
available
Kit. Prototype data: Engine power 752 kW/1025 HP, max. speed 68 km/h, payload 87 t. Dump capacity 53 m³. These big tippers with modern diesel engines, a low-emission model, with permanent four-wheel drive achieve, even in difficult areas, a huge traction and climbing ability as well as an excellent driving stability and therefore short periods of circulation and a high transport volume.L 12.0 x W 6.5 x H 5.8 – 11.5 cm Level of difficulty: 2 (advanced)
available
Kit. Prototype data: Weight approx. 90 t, engine power 12 cylinder four-stroke diesel engine with 588 kW/800 HP, bucket capacity 11 m³, breakaway force 81.6 t. The KOMATSU wheel loader WA 800-2 is often used in mines (mining industry), large construction sites and large quarries for loading the SKW dumper truck with 100 t payload.Manufactured in two-colour injection moulding process.L 15.4 x W 5.3 x H 6.0 – 11.0 cmLevel of difficulty: 2 (advanced)
available
Kit. Prototype data: Power 137 kW/186 HP, 4 cylinder in-line diesel engine with direct injection. Low-emission turbocharger with intercooling.L 6.5 – 15.2 x W 3.5 – 5.5 x H 4.0 – 11.4 cm Level of difficulty: 2 (advanced)
available
Kit. Prototype data: 137 kW/186 HP, 4 cylinder in-line diesel engine with direct injection. Low-emission turbocharger with intercooling.L 6.5 – 20.0 x W 3.5 – 5.5 x H 5.7 – 12.0 cmLevel of difficulty: 2 (advanced)
available
Kit. Liebherr R 934 Litronic HD-SL crawler loader with grapple.Prototype data: Capacity 0.8 m³, H 12 m, reach 14.5 m, depth 6.5 m, operating weight 37 tons, max. speed 3.5 km/h, engine: LH D924TI-E 197 HP, manufactured in France 1998 - 2003.L 6.5 – 20 x W 3.5 – 5.5 x H 5.7 – 12 cmLevel of difficulty: 2 (advanced)
currently not available
Kit. Prototype data: LIEBHERR 974 heavy version with 281 kW/382 HP, weight approx. 70 t. With protective cage and demolition chisel.L 7.5 – 19.0 x W 5.0 x H 6.0 – ca. 11.0 cmLevel of difficulty: 2 (advanced)
available
Kit. Prototype data: Engine power 281 kW/382 HP, weight approx. 70 t, DEMAG MH 32103, 24 m height, Dieselbär D 30-33, clout 1304 kN, HVB 70.01, centrifugal force 706 kN, pulling force 250 kN.L 10.0 x W 5.0 x H 28.0 cm Level of difficulty: 2 (advanced)
available
Kit. Prototype data: LIEBHERR cable excavator HS 883 HD Litronic, engine power 448 kW/609 HP, operation weight approx. 110 t, boom length up to 74 m, max. payload 120 t.L 35.5 x W 5.5 x H 11.0 – 29.0 cmLevel of difficulty: 3 (professionals)
available
Kit. Prototype data: 103 kW/140 HP diesel engine, bucket capacity 2 m³, weight approx. 16 t. L 5.0 – 7.3 x W 2.7 x H 3.7 – 6.0 cmLevel of difficulty: 2 (advanced)
available
Kit. Prototype data: Engine power of 281 kW/382 HP, turbocharger and heavy weight of 70 t ensures a high working speed. Equipped with face shovel to be used in quarries and open pits.L 15.0 x W 5.0 x H 8.0 cm Level of difficulty: 2 (advanced)
currently not available
Kit. Prototype data: With a weight of 70 t and engine power of 281 kW/382 HP the LIEBHERR 974 has the necessary stability and power for holding a drilling device. With the drilling device it is possible to drill in rotary excavation method. Also it is possible to do piping work by using a drilling table. L 7.5 - 23.0 x W 5.0 x H 4.5 - 23.0 cmLevel of difficulty: 2 (advanced)
available
Kit. Emil Bölling wrote down his life story and with it a chronicle of the Bölling companies. Founded in 1926, it started with the forwarding company of the father and ended in the eighties with the Bölling companies and their characteristic red-yellow vehicles. Rarely a company has documented its vehicle fleet over more than 50 years as well as Bölling. (Source: A life with trucks and other vehicles, Emil Bölling). With high quality pad printing.L 6.0 x W 4.0 x H 4.0 – 10.0 cmLevel of difficulty: 2 (advanced)
available