Cranes
Topseller
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.Suitable retrofit kit Sound: item 8454L 18 x W 3.3 x H 3.3 – 5.2 cm
currently not available
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer.Contents: 6 rubber wheels, 6 rims, 3 steel axles, 6 sockets.Suitable for trailer and semitrailer with up to 3 axles and single tyres.
available
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: DOLL 3-axle dolly.L 21.5 x W 3.5 x H 3.9 cm
currently not available
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
With 2 electrically insulated beams, filigree metal work. Middle crossarm: 3,4 cm. Height: 9,8 cm.
available
Kit. Prototype data: ATLAS loading crane type 500.1-13.9/5 (basic device A 5), lifting moment 475 kNm, operating range 13.9 m, own weight 5,830 kg. It is possible to mount ATLAS loading cranes on vehicles, which are loaded with heavy goods.L 3.0 – 10.5 x W 1.5 x H 4.0 – 15.0 cm Level of difficulty: 2 (advanced)
available
Kit. Prototype data: 6-axle, 8 cylinder DAIMLER-BENZ diesel engine OM 442 LA with 405 kW/550 HP, max. lifting capacity 250 t, boom length 58 m. This model is a mobile crane with newest technology for lifting operations up to 250 t. With its 6-axle drive and a high speed of 70 km/h it is accordingly manoeuvrable. With a 4-fold telescopic mast for lifting heights up to 58 m. With superlift facility to increase the lifting capacity.Driving position L 21.0 x W 4.0 x H 5.0 cm Extended L 19.0 x W 14.0 x H 59.0 cm Level of difficulty: 3 (professionals)
available
Kit. Prototype data: The DEMAG AC 665 is a 6-axle vehicle with 250 t lifting load and 58 m main boom. The shipping weight is about 72 t with full equipment including main boom and outriggers. An independent rear-axle steering system allows to operate also in the smallest construction sites. The finely gradated gear box with 16 gears provides an optimized adaptation to all streets and area conditions.Driving position L 21.0 x W 4.0 x H 5.0 cm Extended L 19.0 x W 14.0 x H 59.0 cmLevel of difficulty: 3 (professionals)
available
Kit. L 29.5 x W 8.0 – 24.0 x H 63.0 cmLevel of difficulty: 3 (professionals)
available
Kit. Prototype data: In April 1985, GOTTWALD company introduced the most powerful telescopic crane worldwide called AMK 1000-103. The 10-axle mobile crane is powered by a MERCEDES-BENZ diesel engine with 425 kW/615 HP. 9 axes are steerable. The shipping weight is approx. 100 t. The superstructure is also driven by a MERCEDES-BENZ diesel engine with 186 kW/253 HP. The crane device consists of the crane body with directly installed cylinders. The separately transported telescopic boom consists of the basic boom and 3 telescopic booms. The spool height is about 62 m. Max. payload 1,000 t. Therefore, 140 t balance weight is needed. The prototype was installed at RIGA company in Mayence. The biggest mobile crane used on streets was registered in the Guiness Book of Records in 1986. Fitting lattice top item 10440. Driving position L 25.5 x W 6.5 x H 5 cm Extended L 25.5 x W 23.0 x H 80 cmLevel of difficulty: 3 (professionals)
available
Kit. Complete hook roll-off construction with flat roll skip and cargo, without chassis.L 7.5 x W 2.9 x H 2.4 cm Level of difficulty: 1 (beginners)
available
Kit. Lattice top for mobile telescopic crane GOTTWALD AMK 1000-103 to adapt the functions of the prototype. Suitable for item 10388.L 50.0 x W 3.0 cm. Level of difficulty: 2 (advanced).
available
Kit. Prototype data: Type LTM 1400, 390 kW/530 HP MB turbo engine, total weight 96 t, telescopic mast 50 m.Driving position L 24.0 x W 6.0 x H 5.0 cm Extended L 24.0 x W 18.5 x H 58.0 cmLevel of difficulty: 3 (professionals)
available
Kit. Prototype data: LIEBHERR Hydro cable excavator HS 883 HD Litronic, MERCEDES-BENZ V 12 cylinder diesel engine OM 444 LA with 448 kW/609 HP at 1900 rpm. Boom length approx. 20 m, weight approx. 100 t, payload 120 t. Like no other product this cable excavator satisfies the required demands for special civil engineering, material transshipping, demolition companies and the gravel production. For classical areas of operation this device is ideal. Litronic is an electronical engine-managment system, which combines the advantages of electronics with the power of hydraulic power transmission. L 12.5 x W 6.2 x H 33.0 – 38.0 cm Level of difficulty: 3 (professionals)
available
Kit. Prototype data: LIEBHERR Hydro cable excavator HS 883 HD Litronic, MERCEDES-BENZ V 12 cylinder diesel engine OM 444 LA with 448 kW/609 HP at 1900 rpm. Boom length approx. 20 m, weight approx. 100 t, payload 120 t. Like no other product this cable excavator satisfies the required demands for special civil engineering, material transshipping, demolition companies and the gravel production. For classical areas of operation this device is ideal. Litronic is an electronical engine management system, which combines the advantages of electronics with the power of hydraulic power transmission.L 12.5 x W 5.5 x H 33.0 – 38.0 cmLevel of difficulty: 3 (professionals)
available
Kit. Prototype data: MERCEDES-BENZ 10 cylinder diesel engine, type OM 423 A, 300 kW/408 HP, lifting capacity 800 t, crawler chassis with two separate drives on each side, heavy boom 35 – 77 m, suspended ballast max. 250 t. Because of the extrem dimensions the crane must be disassembled into its separate parts. So the crawler chassis, the lattice masts and the ballast weight can be transported individually. L 28.0 x W 11.5 x H 45.0 cmLevel of difficulty: 3 (professionals)
available
Kit. The BREUER & WASEL series includes this mobile lattice crane LG 1550. In accordance with the prototype, the model has a heavy main and tilt boom. Main field applications are the mounting of windmill-powered plants and industrial facilities. With high quality pad printing.L 25.2 x W 8.0 – 22.0 x H 72.0 cmLevel of difficulty: 3 (professionals)
available
Kit. L 30.0 x W 8.0 – 22.0 x H 72.0 cmLevel of difficulty: 3 (professionals)
available
Kit. Prototype data: As of 1988 the 8-axle telescopic crane LTM 1400 was produced at the LIEBHERR company. Temporarily it was the most successful unit of the 400 t-class. Despite of 96 t total weight including 50 m telescopic boom, this today no longer produced crane with only 17.5 m length, was compact and manoeuvrable. Powered by DAIMLER-BENZ turbo engine with 390 kW/530 HP.Driving position L 23.0 x W 4.0 x H 6.0 cm Extended L 23.5 x W 17.0 x H ca. 70.0 cmLevel of difficulty: 3 (professionals)
available
Kit. Prototype data: LTM 1800 8-axle, 8 cylinder diesel engine, type D 9408 TI-E with 420 kW/570 HP, crane motor LIEBHERR 6 cylinder diesel engine, type D 9406 TI-E with 300 kW/408 HP. Built by company LIEBHERR as of 1987. The LTM 1800 was favoured worldwide by many companies due to its compactness and extreme versatility.Driving position L 22.5 x W 4.5 x H 5.0 cm Extended L 23.0 x W 26.0 x H 80.0 cmLevel of difficulty: 3 (professionals)
available
Kit. Prototype data: This telescopic crawler crane was produced at the LIEBHERR company in Ehingen on behalf of the Japanese company Sankyo some time ago. It can lift max. 800 t. The crawler chassis has two separate hydraulic actuators on each side, that are driven by the engine located in the top superstructure. This 10 cylinder diesel engine by DAIMLER-BENZ, type OM 423 A, has 300 kW/408 HP.L 35.0 x W 12.0 x H 60.0 cmLevel of difficulty: 3 (professionals)
available
Kit.Driving position L 12.0 x W 3.5 x H 4.2 cm Extended L 10.0 x W 9.0 x H 47.0 cmLevel of difficulty: 3 (professionals)
available
Kit. Prototype data: Telescoping boom 38 m, lattice boom 11.3 m, max. working load 50 t, 6 cylinder diesel engine with 270 kW/367 HP, max. speed 85 km/ h, total ballast 9 t. Dimensions driving position: L 14 x W 3.5 x H 4.5 cm. Extended: L 12 x W 7.5 x H 43 cm. Level of difficulty: 2 (advanced).
available
Kit. Prototype data: This crane is the most mobile crane vehicle in its class. Powered by an 8 cylinder diesel engine, DAIMLER-BENZ, type OM 442 A with 260 kW/354 HP, the crane reaches a speed of 75 km/h. Lifting weight 50 t, lifting height 56 m, weight with ballast and folding top only 44 t.Driving position L 14.0 x W 3.5 x H 4.5 cm Extended L 12.0 x W 7.5 x H 43.0 cmLevel of difficulty: 3 (professionals)
available
Kit. Protoype data: 5-axle, max. lifting capacity 160 t. Lifting height with folding top 96 m, max. range with folding top 74 m. This mobile crane stands out due to several performance profiles, which make it the market leader of its class. Powered by a 400 kW/554 HP strong LIEBHERR turbo diesel engine. As a result, the crane became compact, agile and weight-optimized.Driving position L 17.5 x W 3.7 x H 4.6 cm Extended L 15.8 x W 14.5 x H 41.0 cm Level of difficulty: 3 (professionals)
available
Kit. With swing-away KNAACK.Driving position L 24.0 x W 3.8 x H 4.6 cmExtended L 15.5 x W 14.0 x H 43.0 cmLevel of difficulty: 3 (professionals)
available
Kit. Prototype data: Max. lifting height 20 m, max. outreach 24 m, lifting capacity 850 kg, shipping weight 17 t. This crane has some excellent characteristics. It is extremely mobile, quickly applicable and has a high variability. Used on small or average construction sites.Driving position L 17.5 x W 3.0 x H 5.5 cm Extended L 9.0 x W 9.0 x H 28.5 cmLevel of difficulty: 2 (advanced)
available
Kit. Prototype data: Max. lifting height 20 m, max. outreach 24 m, lifting capacity 850 kg, shipping weight 17 t. Fixation to truck by gooseneck with kingpins for trailer skips of 2- or 3-axle tractors.Driving position L 17.5 x W 3.0 x H 5.5 cm Extended L 33.5 x W 9.0 x H 28.5 cmLevel of difficulty: 2 (advanced)
available
Kit. Prototype data: Telescopic crane with extended jib, built as of 1979. This 6-axle vehicle was considered as very compact and versatile in its class. The lattice jibs are transported adjacent to the telescopic mast parts on respective brackets. Driving position L 19.0 x W 4.0 x H 5.0 cm Extended L 17.0 x W 4.0 x H 55.0 cmLevel of difficulty: 3 (professionals)
available