New Hits

This module is ideal for designing a wide variety of model scenes. It can, e. g. serve as a connecting element or a thematic intermediate segment that integrates seamlessly into a larger layout.Features include a pre-milled groove for 1 mm magnetic tape, item 8430 and breakout holes for the InduktivCharger, item 8408 or turnout, items 8445/8448.Supplied with acrylic glass panels for edging.L 90 x W 54 x H 10 cm

available

Cable for extending the EasyChain line for the InduktivCharger, item 8408. Ideally suited for lengthening the EasyChain line and connecting remote InduktivChargers. Length: 0.5 m per cable

available

The semitrailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer:• Infrared transmitter for distance control• Braking and reversing lights• Direction indicators right/left and warning lights controllableL 6.3 x W 2.8 x H 4.2 cm

currently not available

High-performance, low-wear motor for underfloor drive with encapsulated gear and one driven axle, suitable for CarMotion vehicles.Operating voltage: 7 – 12 V DCL 2.5 x W 2.8 x H 1.3 cm

available

The cylindrical plug bases have been specifically developed for connecting light signals from the former manufacturer Alphamodel (Németh Andor, Hungary) and are fully compatible with its proven plug-in system. Available in 6-pin and 13-pin versions, either with pre-soldered connection cables or without cables for custom wiring solutions. The versions with connection cables offer a decisive practical advantage: the delicate pins of the cylindrical plug bases are already professionally soldered.

available

The cylindrical plug bases have been specifically developed for connecting light signals from the former manufacturer Alphamodel (Németh Andor, Hungary) and are fully compatible with its proven plug-in system. Available in 6-pin and 13-pin versions, either with pre-soldered connection cables or without cables for custom wiring solutions. The versions with connection cables offer a decisive practical advantage: the delicate pins of the cylindrical plug bases are already professionally soldered.

available

The semitrailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer:• Infrared transmitter for distance control• Braking and reversing lights• Direction indicators right/left and warning lights controllableL 10.5 x B 2.7 x H 3.5 cm

currently not available

The semitrailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer:• Infrared transmitter for distance control• Braking and reversing lights• Direction indicators right/left and warning lights controllableL 14.4 x W 2.9 x H 4.1 cm

currently not available

The semitrailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer:• Infrared transmitter for distance control• Braking and reversing lights• Direction indicators right/left and warning lights controllableL 14.4 x W 2.9 x H 4.4 cm

currently not available

The semitrailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer:• Infrared transmitter for distance control• Braking and reversing lights• Direction indicators right/left and warning lights controllableL 10.5 x B 2.7 x H 3.5 cm

currently not available

The cylindrical plug bases have been specifically developed for connecting light signals from the former manufacturer Alphamodel (Németh Andor, Hungary) and are fully compatible with its proven plug-in system. Available in 6-pin and 13-pin versions, either with pre-soldered connection cables or without cables for custom wiring solutions. The versions with connection cables offer a decisive practical advantage: the delicate pins of the cylindrical plug bases are already professionally soldered.

available

The cylindrical plug bases have been specifically developed for connecting light signals from the former manufacturer Alphamodel (Németh Andor, Hungary) and are fully compatible with its proven plug-in system. Available in 6-pin and 13-pin versions, either with pre-soldered connection cables or without cables for custom wiring solutions. The versions with connection cables offer a decisive practical advantage: the delicate pins of the cylindrical plug bases are already professionally soldered.

currently not available

With this set you can retrofit your long trailers and semitrailers of kibri and other manufacturers to be able to use the full scope of functions of the CarMotion vehicles.Contents: 1 bumper with 5-pole connection plug and infrared transmitter for distance control.Cable length: ca. 19 cm

available

CarMotion basic starter set consisting of H0 MB ACTROS dump truck with rotating flashing lights, silver (basic), 1 charger with USB charging cable, item 8400, 12 permanent magnets, item 8431 and 1 magnetic bar.Product information "H0 MB ACTROS 3-axle articulate truck with rotating flashing lights, basic, functional model"In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlSuitable retrofit kit Sound: item 8455L 8.4 x W 3.5 x H 3.7 - 6.1 cm

available

The Swiss colour light signals type L, are part of the classic colour light signals used in Swiss railway operations. They are characterized by their compact design and clear, easily recognizable displays. The brass mast is produced using filigree photo-etching techniques. Authentic varnishing. Suitable for all analogue and digital systems. Maintenance-free by LED lighting. Easy installation and connection with cylinder base socket. Height: 6.7 cm.

currently not available

Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlSuitable retrofit kit: item 8452Suitable for Märklin heavy-duty flat car, item 48740L 8.6 x W 3.2 x H 3.5 cm

currently not available

Front axle fully assembled with steering arm and magnet for CarMotion trucks.This front axle is suitable for vehicles with a distance of 45–55 mm from the front axle to the drive axle.Suitable vehicles: 8115, 8152, 8161, 8130, 8131, 8132, 8133, 8135L 2.2 x W 2.8 x H 1.3 cm

available

Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: Magirus Deutz 230 D 16, 169 kW / 230 HP, with tank superstructure.Suitable retrofit kit Sound: item 8450L 8.2 x W 3.2 x H 3.6 cm

available

Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MAGIRUS DEUTZ type 230 D 26 AK KHD Jupiter FlKfz 3-axle, wheelbase 3850 / 1380 mm, ZF six-speed constant-mesh gearbox, AK 6-80 four-stroke V8 Diesel motor type F8L914, performance 169 kW/230 HP, BILSTEIN recovery crane K 12500 H, fully hydraulic, max. payload 12 t, lifting height ca. 11 m.Suitable retrofit kit Sound: item 8452Suitable for Märklin heavy-duty flat car, item 48740L 11 – 18 x W 3.2 – 4.3 x H 3.9 – 11.5 cm

available

Non-conductive!Contents: 3 pairs with 3 adapters each (S: norm, M: +0.3 mm and L: +0.6 mm).

available

Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: Magirus Deutz 200 D 16 S, 161 kW / 220 HP, engine type F8L 714.Suitable retrofit kit Sound: item 8452L 8.6 x W 3.2 x H 3.5 cm

available

In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MB Actros tractor 1843 V6 engine, 315 kW / 428 HP.Suitable for Märklin heavy-duty flat car, item 48740L 7.5 x W 3.5 x H 3.7 cm

available

With the CarMotion chassis based on the popular 3-axle Actros, you can realize your vision of a truly individual custom vehicle. The batteries are already soldered in place, and an integral circuit board provides convenient on/off switching. After only minimal adjustments, a driver’s cab of your choice can be installed. Ideal for demanding model builders – exclusive, flexible, and focused on the essentials. Sound is not included in this limited series.L 8 x B 3 x H 1.6 cm

available

Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: Mercedes-Benz 1624, 6-cylinder inline engine OM 355, 177 kW / 240 HP.Suitable retrofit kit Sound: item 8453Suitable for Märklin heavy-duty flat car, item 48740L 8.2 x W 3.3 x H 3.3 – 4.8 cm

available