Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.L 18 x W 3.3 x H 3.3 – 5.2 cm
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer.Contents: 6 rubber wheels, 6 rims, 3 steel axles, 6 sockets.Suitable for trailer and semitrailer with up to 3 axles and single tyres.
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: DOLL 3-axle dolly.L 21.5 x W 3.5 x H 3.9 cm
The factory building item 45610 can be enlarged with the annexe item 45614. The engine house item 45612 completes the factory building and annexe to a full factory building. Dimensions: L 6 x W 7 x H 7 cm.
Kit. For 4 tracks. The bridge signal tower Hamm is quite suitable to mount the Viessmann signal heads items 4751 – 4753 in multiplex technology. Thus it will become a real eye-catcher.L 28.0 x W 11.0 x H 17.5 cmPassage height 8.6 cm / Passage width 21.0 cmLevel of difficulty: 2 (advanced)
Kit. Sand store L 10.2 x W 4.4 x H 10.8Coaling store L 24.4 x W 6.0 x H 11.0 cmPassage height 6.5 cm / Passage width 6.4 cmLevel of difficulty: 2 (advanced)
How does the coal get into the loco? This coaling shed is a smaller one, but at the same time the locos can also be filled with water by the water crane. Dimensions: L 13.5 x W 7.5 x H 7.7 cm.
A large coaling store in the era of steam locomotive is something indispensable and essential for a large railway yard. This particular coaling store has two separate filling vessels. Dimensions: L 19.3 x W 17 x H 13.8 cm / Track middle radius 9.5 cm. Passage height 6.7 cm / Passage width 6.8 cm.
Diesel tank with e.g. lime work item-No. 45725 offers an interesting combination on your model train layout. To fire the lime rock power is required. Diesel tank offers storage of fuels. Suitable additional item filling station item-No. 45527 and coal bunker item-No. 45719. Dimensions: L 18,5 x W 14 x H 9 cm.
Whether you drive by diesel or electric current, a modern loco shed is a must-have. The entering or leaving locomotives can open and close the doors automatically. Dimensions: L 34.5 x W 17 x H 11 cm / Track middle distance 7.5 cm.
The engine house completes the factory building item-No. 45610 and annexe item-No. 45614 to a full factory building. Dimensions: L 13 x W 8.8 x H 10.5 cm.
Kit. For extending the loco shed Ottbergen item 39452 to a maximum locomotive length of 30.0 cm.With connection system.L 16.8 x W 10.0 x H 12.0 cmLevel of difficulty: 2 (advanced)