Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.L 18 x W 3.3 x H 3.3 – 5.2 cm
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer.Contents: 6 rubber wheels, 6 rims, 3 steel axles, 6 sockets.Suitable for trailer and semitrailer with up to 3 axles and single tyres.
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: DOLL 3-axle dolly.L 21.5 x W 3.5 x H 3.9 cm
For the universal installation on all model bridges. Mast in filigree metal work with Märklin bridge support as well as universal holder and beam. Delivery without bridge model. Middle crossarm: 3,4 cm. Height: 9,9 cm.
Filigree metal work with stamped rivet imitations. Suitable for the mounting of the tensioning pulley item 4173 and tensioning lever item 4174. Height: 11,5 cm.
Catenary system for one oval track (184 cm x 84 cm), consisting of 24 standard masts item 4110, 4 middle masts item 4112, 9 catenary wires 36 cm of item 4143, 7 catenary wires 17.25 cm of item 4132, 16 catenary wires 14.2 cm of item 4133, 2 contact wires equalizing pieces item 4139 and equalizing pieces item 4139 and one height marker, item 4196. To use the catenary system as a power supply, the following additional items are required: Power mast item 4111, fuse holder item 4188 with fuses, and Y-wires item 4170 which ensure a reliable connection between the wires. Compatible with Märklin digital starter set ICE2, item 29792.
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for Fleischmann Model track (radius 357 mm), Fleischmann Profi-track (radius 356,5 mm) and Roco LINE + Roco geoLINE (radius 358 mm).
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for Märklin C-track, Märklin K-track and Märklin M-track (radius 360 mm).
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for Tillig H0-Elite (radius 366 mm).
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for Fleischmann Model-track (radius 415 mm).
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for Fleischmann Profi-track (radius 420 mm) and Roco LINE + Roco geoLINE (radius 419,5 mm).
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for Märklin K-track (radius 424,6 mm) and Tillig H0-Elite (radius 425 mm).
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for Märklin C-track (radius 437,5mm), Märklin M-track (radius 437,4 mm) and Roco LINE + Roco geoLINE (radius 172,5 mm).
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for Fleischmann Profi-track (radius 483,5 mm) and Roco LINE + Roco geoLINE (radius 481,2 mm).
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for all track systems.
The catenary contact wire is equipped with parallel running out ends and so best useable to tension with Viessmann tensioning catenary e. g. items 4174 and 4173.