Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.L 18 x W 3.3 x H 3.3 – 5.2 cm
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer.Contents: 6 rubber wheels, 6 rims, 3 steel axles, 6 sockets.Suitable for trailer and semitrailer with up to 3 axles and single tyres.
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: DOLL 3-axle dolly.L 21.5 x W 3.5 x H 3.9 cm
Kit. Prototype data: 276 kW/375 HP engine power, cutting width 6 – 9 m and computerized controls for adjustment and handling make this combine harvester perfect for contractors and large farms. The model CLAAS LEXION 480 is equipped with a 7.5 m wide cutting device and a 10,500 l grain tank.L 13.5 – 22.5 x W 7.0 – 9.0 x H 4.8 cmLevel of difficulty: 2 (advanced)
Kit. Prototype data: 191 kW/260 HP MAN engine, speed 0.02 – 50 km/h. With the continuously variable gearbox, new performance dimensions are offered. By this technique the field output is increased and the fuel consumption is reduced. The driver is able to use the full power continuously and perfectly adjust the driving speed at all times and under all circumstances.L 10.5 x W 8.2 x H 4.0 cm Level of difficulty: 2 (advanced)
Kit. Prototype data: 191 kW/260 HP MAN engine, speed 0.02 – 50 km/h. With the continuously variable gearbox, new performance dimensions are offered. By this technique the field output is increased and the fuel consumption is reduced. The driver is able to use the full power continuously and perfectly adjust the driving speed at all times and under all circumstances.L 6.4 x W 3.0 x H 3.7 cmLevel of difficulty: 2 (advanced)
Kit. Prototype data: FENDT Favorit Vario 926, 191 kW/260 HP, speed 0.02 – 50 km/h. The kit includes 6 trunks.L 8.5 x W 3.0 x H 4.0 cmLevel of difficulty: 2 (advanced)
Kit. Prototype data: 1 cylinder two-stroke engine with hot bulb and slot steering, max. power 26 kW/35 HP for one hour, continuous power 22 kW/30 HP.L 5.0 x W 2.2 x H 2.8 cmLevel of difficulty: 2 (advanced)
Kit. Prototype data: 1 cylinder two-stroke engine with hot bulb and slot steering, max. power 26 kW/35 HP for one hour, continuous power 22 kW/30 HP.Manufactured in two-colour injection moulding process.L 10.0 x W 2.3 x H 2.7 cm Level of difficulty: 2 (advanced)
Kit. Prototype data: MB 2226 – 2636, 206 – 261 kW/280 – 355 HP diesel engine, type M 120, total payload 24 t, total weight 40 t, EPSILON loading crane 18.78/20.78, lifting capacity 4.5 – 6 t. The kit includes 6 trunks.Front part L 9.0 x W 3.3 – 4.0 x H 4.5 – 9.0 cm Rear part L 4.7 x W 2.7 x H 3.2 cmLevel of difficulty: 2 (advanced)
Kit. Prototype data: The double drum winch 8002 TL of company IGLAND has a pulling power of 2 x 8.0 t and a max. rope capacity of 2 x 107.0 m for a rope diameter of 12.0 mm. With a power requirement of 53 HP per drum the MB TRAC is the correct tractor to drive the winch. As the winch is mounted in the rear linkage only, the tractor can still be used in agriculture. With the shield, which can be mounted to any front loader, the wood can be sorted at the lumberyard. The kit includes 6 trunks.L 8.5 x W 3.0 x H 4.0 – 6.0 cm Level of difficulty: 2 (advanced)
Kit. To reduce the crossing on the field and in this way the soil compaction to a minimum, more and more farmers use equipment combinations. With the front cultivator the soil is loosened to a depth of 30.0 cm. The loosened soil is crushed by the rotary harrow installed in the rear, so it makes the sowing much easier with the adapted sowing tool. The crossings are reduced from 3 to 1, which means obviously time saving and less soil compaction. L 11.4 x W 3.5 x H 4.0 cm Level of difficulty: 2 (advanced)
Kit. Consists of front- and back loader with forklift forks, broad shovel, silo shovel, seeding material container, counterweight, chaff cutter, mounted chisel and seed drill. Level of difficulty: 2 (advanced)
Kit. Prototype data: MEILLER trailer type KMT 18/1 (B/L), swap body, capacity approx. 15.0 cm³, special dumper trailers for rocks with 10.0 m³ capacity each.L 12.0 x W 3.0 x H 3.7 cm / L 11.0 x W 3.1 x H 3.4 cm / L 11.0 x W 3.1 x H 3.7 cmLevel of difficulty: 2 (advanced)