Form Signals
Topseller
4154 H0 Universal catenary wire 240 – 270 mm, 3 pieces
€11.50*
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
8036 H0 MB Round bonnet 3-axle with long log truck, basic, functional model
€299.95*
Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.L 18 x W 3.3 x H 3.3 – 5.2 cm
currently not available
8422 H0 Retrofit set rubber wheels for kibri trailers semitrailers, single tyre
€17.50*
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer.Contents: 6 rubber wheels, 6 rims, 3 steel axles, 6 sockets.Suitable for trailer and semitrailer with up to 3 axles and single tyres.
available
8032 H0 MB ACTROS 3-axle tractor with concrete parts, rotating flashing lights, basic, functional model
€289.95*
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: DOLL 3-axle dolly.L 21.5 x W 3.5 x H 3.9 cm
currently not available
4150 H0 Universal catenary wire 140 – 160 mm, 5 pieces
€12.50*
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
4124 H0 H-Profile middle mast
€16.95*
With 2 electrically insulated beams, filigree metal work. Middle crossarm: 3,4 cm. Height: 9,8 cm.
available
4470 N Digital semaphore home signal, single-arm
€76.95*
With filigree latticed brass mast and authentic varnishing. Printed signal arms. Powerful low noise drive. Integrated multi protocol digital decoder for DCC/MM. Slow signal movement due to special underfloor drive unit. Even authentic single bouncing is individually adjustable. By factory setting the signal bouncing is adjusted. Compact overfloor drive is only 4,5 mm high and includes a decoder placed on the signal mast base. Maintenance free by LED lighting. Suitable for analogue and digital use. Configurable switching outputs can switch relays, e. g. for train control. Feedback via RailCom. For train control it is important to use a relay, due to the low maximum load of the contacts and the short pulse length, e. g. the electronic relay item 5552. Signal aspects Hp0 and Hp1. Height: 7,2 cm. Drive unit: L 3,5 x W 1,6 x H 0,45 cm.
available
4471 N Digital semaphore home signal, with 2 coupled arms
€92.50*
With filigree latticed brass mast and authentic varnishing. Printed signal arms. Powerful low noise drive. Integrated multi protocol digital decoder for DCC/MM. Slow signal movement due to special underfloor drive unit. Even authentic single bouncing is individually adjustable. By factory setting the signal bouncing is adjusted. Compact overfloor drive is only 4,5 mm high and includes a decoder placed on the signal mast base. Maintenance free by LED lighting. Suitable for analogue and digital use. Configurable switching outputs can switch relays, e. g. for train control. Feedback via RailCom. For train control it is important to use a relay, due to the low maximum load of the contacts and the short pulse length, e. g. the electronic relay item 5552. Signal aspects Hp0 and Hp2. Height: 7,2 cm. Drive unit: L 3,5 x W 1,6 x H 0,45 cm.
available
4472 N Digital semaphore home signal, with 2 uncoupled arms
€118.95*
With filigree latticed brass mast and authentic varnishing. Printed signal arms. Powerful low noise drive. Integrated multi protocol digital decoder for DCC/MM. Slow signal movement due to special underfloor drive unit. Even authentic single bouncing is individually adjustable. By factory setting the signal bouncing is adjusted. Compact overfloor drive is only 4,5 mm high and includes a decoder placed on the signal mast base. Maintenance free by LED lighting. Suitable for analogue and digital use. Configurable switching outputs can switch relays, e. g. for train control. Feedback via RailCom. For train control it is important to use a relay, due to the low maximum load of the contacts and the short pulse length, e. g. the electronic relay item 5226. Signal aspects Hp0, Hp1 and Hp2. Height: 7,2 cm. Drive unit: L 3,5 x W 1,6 x H 0,45 cm.
available
4407 N Semaphore distant signal, fixed disk, movable arm
€77.50*
Filigree brass mast and authentic varnishing. Printed signal disks and arms. Underfloor drive unit. Integrated main switching contacts arrange authentic stop. Next main signal shows stop. Maintenance free by LED lighting. Signal aspects Vr0 and Vr2. Height: 3,2 cm. Mounting depth: 68 mm.
available
4406 N Semaphore distant signal, movable disk
€74.50*
Filigree brass mast and authentic varnishing. Printed signal disks and arms. Underfloor drive unit. Integrated main switching contacts arrange authentic stop. Next main signal shows stop. Maintenance free by LED lighting. Signal aspects Vr0 and Vr1. Height: 3,2 cm.
available
4409 N Semaphore stop signal with flange socket
€62.95*
With filigree brass mast, authentic varnishing and underfloor drive unit. Disk is movable and lighted. With one LED, maintenance free. This version with flange socket is standing individually by the track. Signal aspects Sh0 and Sh1. Height: 3,5 cm.
available
4419 N Wait signal with light
€33.50*
With filigree brass mast, authentic varnishing and base socket for easy mounting. With 3 LEDs, maintenancefree. Signal aspect Ra11.Height: 3.5 cm
available