Specialist dealer search

Download Center

Service / Help

Experience since 1988

Go to homepage
€0.00*
TT

Overhead Line

Topseller

H0 Universal catenary wire 240 – 270 mm, 3 pieces
4154 H0 Universal catenary wire 240 – 270 mm, 3 pieces
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.

€11.50*

available

Stk
H0 MB Round bonnet 3-axle with long log truck, basic, functional model H0 MB Round bonnet 3-axle with long log truck, basic, functional model
8036 H0 MB Round bonnet 3-axle with long log truck, basic, functional model
Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.Suitable retrofit kit Sound: item 8454L 18 x W 3.3 x H 3.3 – 5.2 cm

€299.95*

currently not available

Go to retailer search
H0 Retrofit set rubber wheels for kibri trailers semitrailers, single tyre
8422 H0 Retrofit set rubber wheels for kibri trailers semitrailers, single tyre
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer.Contents: 6 rubber wheels, 6 rims, 3 steel axles, 6 sockets.Suitable for trailer and semitrailer with up to 3 axles and single tyres.

€17.50*

few available

Stk
H0 MB ACTROS 3-axle tractor with concrete parts, rotating flashing lights, basic, functional model H0 MB ACTROS 3-axle tractor with concrete parts, rotating flashing lights, basic, functional model
8032 H0 MB ACTROS 3-axle tractor with concrete parts, rotating flashing lights, basic, functional model
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: DOLL 3-axle dolly.L 21.5 x W 3.5 x H 3.9 cm

€289.95*

currently not available

Go to retailer search
H0 Universal catenary wire 140 – 160 mm, 5 pieces
4150 H0 Universal catenary wire 140 – 160 mm, 5 pieces
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.

€12.50*

available

Stk
H0 H-Profile middle mast
4124 H0 H-Profile middle mast
With 2 electrically insulated beams, filigree metal work. Middle crossarm: 3,4 cm. Height: 9,8 cm.

€16.95*

available

Stk
Filter
TT Beam, 5 pieces
4271 TT Beam, 5 pieces
Suitable for all Viessmann TT catenary masts. Middle crossarm: 2,7 cm.

€17.50*

available

Stk
TT Catenary contact wire equalizing piece
4239 TT Catenary contact wire equalizing piece
For universal installation with bent catenary contact wires, e. g. in point areas. Length: 5 cm.

€4.95*

currently not available

Go to retailer search
TT Catenary mast
4214 TT Catenary mast
Filigree metal work with stamped rivet imitations. Suitable for the mounting of the tensioning pulley item 4273. Height: 8,5 cm.

€13.95*

available

Stk
TT Catenary wire 112,5 mm, 5 pieces
4233 TT Catenary wire 112,5 mm, 5 pieces
Ready-to-install catenary wires with fixing holders for easy hooking onto the beam. Suitable for Tillig ballast track. Diameter 0,5 mm. Radius: 286 mm.

€13.95*

available

Stk
TT Catenary wire 122 mm, 5 pieces
4230 TT Catenary wire 122 mm, 5 pieces
Ready-to-install catenary wires with fixing holders for easy hooking onto the beam. Suitable for Tillig and model track. Diameter 0,5 mm. Radius: 310 mm.

€13.95*

available

Stk
TT Catenary wire 130 mm, 5 pieces
4234 TT Catenary wire 130 mm, 5 pieces
Ready-to-install catenary wires with fixing holders for easy hooking onto the beam. Suitable for Tillig ballast track. Diameter 0,5 mm. Radius: 330 mm.

€13.95*

available

Stk
TT Catenary wire 139 mm, 5 pieces
4235 TT Catenary wire 139 mm, 5 pieces
Ready-to-install catenary wires with fixing holders for easy hooking onto the beam. Suitable for Tillig model track. Diameter 0,5 mm. Radius: 353 mm.

€13.95*

available

Stk
TT Catenary wire 200 mm, 3 pieces
4231 TT Catenary wire 200 mm, 3 pieces
Ready-to-install catenary wires with fixing holders for easy hooking onto the beam. Suitable for Tillig ballast- and model track. Diameter 0,5 mm.

€13.95*

available

Stk
TT Catenary wire 332 mm, 3 pieces
4232 TT Catenary wire 332 mm, 3 pieces
Ready-to-install catenary wires with fixing holders for easy hooking onto the beam. Suitable for Tillig ballast- and model track. Diameter 0,5 mm.

€13.95*

available

Stk
TT Eyehook bending pliers
4298 TT Eyehook bending pliers
To shorten the universal catenary wires and for easy bending the fixing eyehooks.

€74.50*

currently not available

Go to retailer search
TT Head-span for spanbridge, 3 pieces
4277 TT Head-span for spanbridge, 3 pieces
For the universal assembly of a spanbridge.

€20.95*

available

Stk
TT Head-span mast, height: 10,9 cm
4215 TT Head-span mast, height: 10,9 cm
Filigree metal work with stamped rivet imitations.

€15.50*

available

Stk
TT Head-span mast, height: 12,4 cm
4216 TT Head-span mast, height: 12,4 cm
Filigree metal work with stamped rivet imitations.

€17.95*

available

Stk
TT Head-span mast, height: 14,2 cm
4217 TT Head-span mast, height: 14,2 cm
Filigree metal work with stamped rivet imitations.

€22.50*

available

Stk
TT Height marker
4296 TT Height marker
To check the correct position of the catenary wire.

€3.50*

available

Stk
TT Mast positioner
4297 TT Mast positioner
Using the Viessmann mast positioner is the easiest way to check the correct mast position and the distance between catenary wire and the track middle. Additional contact wire positioning device enables to control deviations of the catenary wire to the track middle. That ensures that the current consumer has contact with the catenary wire.

€9.50*

available

Stk
TT Middle mast
4212 TT Middle mast
With 2 electrically insulated upper beams, filigree metal work. Middle crossarm: 2,4 cm. Height: 7,15 cm.

€15.50*

available

Stk
TT Standard mast TT Standard mast
4210 TT Standard mast
With beam, filigree metal work. Middle crossarm: 2,4 cm. Height: 7,15 cm.

€11.50*

available

Stk
TT Standard mast with double beam
4213 TT Standard mast with double beam
With electrically insulated double beam, filigree metal work. Middle crossarm: 2,4 cm. Height: 7,15 cm.

€17.50*

available

Stk
TT Standard mast, 10 pieces
4209 TT Standard mast, 10 pieces
With beam, filigree metal work. Middle crossarm: 2,4 cm. Height: 7,15 cm. Low priced pack with content of 10 pieces.

€107.95*

available

Stk
TT Starter set Catenary
4200 TT Starter set Catenary
Catenary set for one oval track with one turnout, consisting of 20 masts item 4210, 1 tensioning mast item 4214, 17 catenary wires 12,2 cm of item 4230, 2 catenary wires 20 cm of item 4231, 2 catenary wires 33,2 cm of item 4232 and the height marker item 4296. To use the catenary system functionally (current-carrying), the following additional items are required: power mast item 4211 and fuse holder item 4188 with fuses.

€249.95*

currently not available

Go to retailer search
TT Support span, cross span wires and insulators
4276 TT Support span, cross span wires and insulators
For the universal assembly of spanbridges with maximum distance to the middle mast of 30 cm.

€7.50*

available

Stk
TT Suspended box girders covering 2 tracks
4260 TT Suspended box girders covering 2 tracks
Equipped with tower mast, ready mounted and varnished. With 2 electrically insulated beams. The beam components are adjustable. With rear side cut-out to accommodate more beams. Filigree metal work with stamped rivet imitations. Maximum span width: 7,3 cm, height: 10,9 cm.

€37.95*

available

Stk
TT Suspended box girders covering 3 tracks
4261 TT Suspended box girders covering 3 tracks
Equipped with tower mast, ready mounted and varnished. With 3 electrical insulated beams. The beam components are adjustable. With rear side cut-out to accommodate more beams. Filigree metal work with stamped rivet imitations. Maximum span width: 11,7 cm, height: 12,4 cm.

€48.95*

available

Stk