Overhead Line
Topseller
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.Suitable retrofit kit Sound: item 8454L 18 x W 3.3 x H 3.3 – 5.2 cm
currently not available
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer.Contents: 6 rubber wheels, 6 rims, 3 steel axles, 6 sockets.Suitable for trailer and semitrailer with up to 3 axles and single tyres.
available
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: DOLL 3-axle dolly.Suitable retrofit kit Sound: item 8456L 21.5 x W 3.5 x H 3.9 cm
currently not available
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
With 2 electrically insulated beams, filigree metal work. Middle crossarm: 3,4 cm. Height: 9,8 cm.
available
Suitable for all Viessmann TT catenary masts. Middle crossarm: 2,7 cm.
available
For universal installation with bent catenary contact wires, e. g. in point areas. Length: 5 cm.
available
Filigree metal work with stamped rivet imitations. Suitable for the mounting of the tensioning pulley item 4273. Height: 8,5 cm.
available
Ready-to-install catenary wires with fixing holders for easy hooking onto the beam. Suitable for Tillig ballast track. Diameter 0,5 mm. Radius: 286 mm.
available
Ready-to-install catenary wires with fixing holders for easy hooking onto the beam. Suitable for Tillig and model track. Diameter 0,5 mm. Radius: 310 mm.
available
Ready-to-install catenary wires with fixing holders for easy hooking onto the beam. Suitable for Tillig ballast track. Diameter 0,5 mm. Radius: 330 mm.
available
Ready-to-install catenary wires with fixing holders for easy hooking onto the beam. Suitable for Tillig model track. Diameter 0,5 mm. Radius: 353 mm.
available
Ready-to-install catenary wires with fixing holders for easy hooking onto the beam. Suitable for Tillig ballast- and model track. Diameter 0,5 mm.
available
Ready-to-install catenary wires with fixing holders for easy hooking onto the beam. Suitable for Tillig ballast- and model track. Diameter 0,5 mm.
currently not available
To shorten the universal catenary wires and for easy bending the fixing eyehooks.
available
For the universal assembly of a spanbridge.
available
Filigree metal work with stamped rivet imitations.
available
Filigree metal work with stamped rivet imitations.
available
Filigree metal work with stamped rivet imitations.
available
To check the correct position of the catenary wire.
available
Using the Viessmann mast positioner is the easiest way to check the correct mast position and the distance between catenary wire and the track middle. Additional contact wire positioning device enables to control deviations of the catenary wire to the track middle. That ensures that the current consumer has contact with the catenary wire.
available
With 2 electrically insulated upper beams, filigree metal work. Middle crossarm: 2,4 cm. Height: 7,15 cm.
available
With beam, filigree metal work. Middle crossarm: 2,4 cm. Height: 7,15 cm.
available
With electrically insulated double beam, filigree metal work. Middle crossarm: 2,4 cm. Height: 7,15 cm.
available
With beam, filigree metal work. Middle crossarm: 2,4 cm. Height: 7,15 cm. Low priced pack with content of 10 pieces.
available
Catenary set for one oval track with one turnout, consisting of 20 masts item 4210, 1 tensioning mast item 4214, 17 catenary wires 12,2 cm of item 4230, 2 catenary wires 20 cm of item 4231, 2 catenary wires 33,2 cm of item 4232 and the height marker item 4296. To use the catenary system functionally (current-carrying), the following additional items are required: power mast item 4211 and fuse holder item 4188 with fuses.
available
For the universal assembly of spanbridges with maximum distance to the middle mast of 30 cm.
available
Equipped with tower mast, ready mounted and varnished. With 2 electrically insulated beams. The beam components are adjustable. With rear side cut-out to accommodate more beams. Filigree metal work with stamped rivet imitations. Maximum span width: 7,3 cm, height: 10,9 cm.
available
Equipped with tower mast, ready mounted and varnished. With 3 electrical insulated beams. The beam components are adjustable. With rear side cut-out to accommodate more beams. Filigree metal work with stamped rivet imitations. Maximum span width: 11,7 cm, height: 12,4 cm.
available