Railroad Crossing
Topseller
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.Suitable retrofit kit Sound: item 8454L 18 x W 3.3 x H 3.3 – 5.2 cm
currently not available
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer.Contents: 6 rubber wheels, 6 rims, 3 steel axles, 6 sockets.Suitable for trailer and semitrailer with up to 3 axles and single tyres.
available
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: DOLL 3-axle dolly.L 21.5 x W 3.5 x H 3.9 cm
currently not available
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
With 2 electrically insulated beams, filigree metal work. Middle crossarm: 3,4 cm. Height: 9,8 cm.
available
Level crossing with two barriers, powered by 2 separate drive units which slowly open and close the barriers. Track filling pieces, ramps and printed traffic signs are also included. Automatic operation requires additional switching tracks resp. switching contacts. For two tracks lines electronic relay item 5552 is also required. Suitable sound module: item 5556. Length of barrier approx: 5,8 cm.
available
Spur TT Bahnübergang – Realistische Bahnübergänge im Maßstab 1:120 von Viessmann
Ein Bahnübergang ist mehr als nur ein Gleisübergang – er ist ein zentrales Element jeder Modellbahnanlage. Die Spur TT Bahnübergänge von Viessmann verbinden vorbildgetreue Optik mit zuverlässiger Technik und sorgen für mehr Realität auf Ihrer Anlage im Maßstab 1:120. Perfekt abgestimmt auf das TT-System, bringen diese Bahnübergänge Bewegung und Sicherheit auf Ihre Miniatur-Straßen und -Schienen.
Automatisierte Bahnübergänge für realistischen Betrieb
Die Viessmann Bahnübergänge sind mit beweglichen Schranken, Lichtsignalen und optionalen Soundeffekten ausgestattet – ideal für einen realistischen Ablauf im Modellbetrieb. Die Steuerung erfolgt über Schaltkontakte, digitale Decoder oder Zeitmodule und lässt sich problemlos in analoge wie digitale Anlagen integrieren.
Maßstabsgetreue Gestaltung und robuste Technik
Jeder TT-Bahnübergang ist detailliert gestaltet und basiert auf realen Vorbildern. Die Schrankenarme sind filigran gefertigt, die Leuchtfunktion sorgt für zusätzliche Authentizität. Dank hochwertiger Materialien und präziser Mechanik ist ein langlebiger und störungsfreier Betrieb garantiert.
Vielfältige Varianten und Erweiterungen
Ob einfacher Bahnübergang mit Halbschranken, vollautomatische Varianten mit Blinklicht und Sound oder ergänzende Andreaskreuze und Verkehrsschilder – Viessmann bietet ein durchdachtes Sortiment, das sich flexibel in jede TT-Anlage integrieren lässt.