Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.Suitable retrofit kit Sound: item 8454L 18 x W 3.3 x H 3.3 – 5.2 cm
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer.Contents: 6 rubber wheels, 6 rims, 3 steel axles, 6 sockets.Suitable for trailer and semitrailer with up to 3 axles and single tyres.
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: DOLL 3-axle dolly.L 21.5 x W 3.5 x H 3.9 cm
With filigree brass mast, authentic varnishing, printed signal disk and signal arm, bulb and underfloor drive unit. Integrated main switching contacts arrange authentic stop. Next main signal shows stop. For authentic slow motion function only item 5216 slow speed resistor is required. Signal aspects Vr0 and Vr1. Spare bulb: item 6200. Height: 3,9 cm. Mounting depth: 68 mm.
With filigree latticed brass mast and authentic varnishing. Printed signal arms. Underfloor drive unit with integrated automatic train control. Maintenance free by LED lighting. Signal aspects Hp0 and Hp2. Height: 7,8 cm.
With filigree latticed brass mast and authentic varnishing. Printed signal arms. Underfloor drive unit with integrated automatic train control. Maintenance free by LED lighting. Signal aspects Hp0, Hp1 and Hp2. Height: 7,8 cm.
With filigree latticed brass mast and authentic varnishing. Printed signal arms. Underfloor drive unit with integrated automatic train control. Maintenance free by LED lighting. Signal aspects Hp0 and Hp1. Height: 7,8 cm.
With filigree brass mast, authentic varnishing and underfloor drive unit. Disk is movable and lighted. Different kinds of block signals are possible. This version with flange socket is single standing by the track. Maintenance free due to LED lighting. Signal aspects Sh0 and Sh1. Height: 4,2 cm. Mounting depth: 76 mm.