Specialist dealer search

Download Center

Service / Help

Experience since 1988

Go to homepage
€0.00*
H0 Pavement with 90°-angle

48253 H0 Pavement with 90°-angle

€24.95*

Prices incl. VAT plus shipping costs

Create review

Delivery time: 2-4 Werktage

Stk
Article no.: 48253

Product information "H0 Pavement with 90°-angle "

This pavement of the stone art series consists of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The pavement with 90°-angle fits to corner houses and the surface is designed in concrete appearance. Dimensions: L 10,9 x W 10,9 x H 0,2 cm.

Warn- und Sicherheitshinweise

Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!


Hersteller

Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

.PDF
48253 ( 3,492.91 kb )

Passende Artikel

H0 Street plate cobblestone of Stone Art, 3 pieces, L 15 x W 8 cm
48240 H0 Street plate cobblestone of Stone Art, 3 pieces, L 15 x W 8 cm
The street plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The plates are flexible and can be easily cut with a knife. One with a manhole cover and 2 canal lids, the other ones without any insert.

Content: 0.036 qm (€625.00* / 1 qm)

€22.50*

available

Stk
H0 Side-strip with lay-by for 1 car of Stone Art
48250 H0 Side-strip with lay-by for 1 car of Stone Art
This side-strip with lay-by of the stone art series consists of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Universally applicable. The surface of the pavement is designed in concrete appearance. The area near the pavement is individually plantable. The lay-by is suitable for one car. L 27,3 x W 6,6 x H 0,2 cm.

€27.95*

available

Stk
H0 Side-strip with lay-by for 3 cars of Stone Art
48251 H0 Side-strip with lay-by for 3 cars of Stone Art
This side-strip with lay-by of the stone art series consists of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Universally applicable. The surface of the pavement is created in concrete appearance. The area near the pavement is individually plantable. The lay-by is suitable for 3 cars or 1 bus. L 27,3 x W 6,6 x H 0,2 cm.

€27.95*

available

Stk
H0 Asphalt street of Stone Art, L 75 x W 8 cm H0 Asphalt street of Stone Art, L 75 x W 8 cm
48260 H0 Asphalt street of Stone Art, L 75 x W 8 cm
The Asphalt street from the stone art series consists of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The street is flexible and can be easily cut with a knife. The street comes with 2 manhole covers and 2 canal lids. By light warming up using hot air the material gets flexible and uneven ways are possible to adjust.

Content: 0.75 m (€33.27* / 1 m)

€24.95*

available

Stk
H0 Street plate asphalt of Stone Art, 60°-intersection to the left, L 22 x W 19,5 cm
48264 H0 Street plate asphalt of Stone Art, 60°-intersection to the left, L 22 x W 19,5 cm
The street plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The plates are flexible and can be easily cut with a knife.

€13.50*

available

Stk

Customers also bought

InduktivCharger
8408 InduktivCharger
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

€129.95*

available

Stk
H0 Side-strip with lay-by for 3 cars of Stone Art
48251 H0 Side-strip with lay-by for 3 cars of Stone Art
This side-strip with lay-by of the stone art series consists of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Universally applicable. The surface of the pavement is created in concrete appearance. The area near the pavement is individually plantable. The lay-by is suitable for 3 cars or 1 bus. L 27,3 x W 6,6 x H 0,2 cm.

€27.95*

available

Stk
Motorized 2/3-way turnout
8448 Motorized 2/3-way turnout
This turnout is equipped with a powerful and low-noise drive featuring secure positioning achieved by a robust 10 mm motor with planetary gear. By rearranging the variable end stops, a left, right, or 3-way diversion can be selectively created. The electronics are housed compactly within the casing. The diverter can be controlled manually, via buttons/switches or our InduktivCharger, item 8408, enabling digital control capabilities. Like the vehicles, the turnout can be comfortably configured in the CarManager.

€49.95*

currently not available

Go to retailer search
H0 Side-strip with lay-by for 1 car of Stone Art
48250 H0 Side-strip with lay-by for 1 car of Stone Art
This side-strip with lay-by of the stone art series consists of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Universally applicable. The surface of the pavement is designed in concrete appearance. The area near the pavement is individually plantable. The lay-by is suitable for one car. L 27,3 x W 6,6 x H 0,2 cm.

€27.95*

available

Stk
Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm

€9.95*

available

Stk
N Station Baden-Baden
47505 N Station Baden-Baden
A detailed reproduction of the station and a must-have for all who enjoy the romantic era.The prototype built in 1892 is located in Baden-Baden. Vollmer offers a prototypical model which fits epoch II. Dimensions: L 51 x W 11,5 x H 16 cm.

€104.95*

available

Stk