Looks like stone, feels like stone, is natural like stone
Under this motto, Vollmer offers wall panels, road panels, tunnel portals and much more made of a mineral composite material in H0, TT, N, 0 and G gauges.
This material creates an unsurpassed realistic stone surface. The panels are flexible and can be easily cut to size with a cutter knife. The thicker and stiffer wall panels can also be bent - by heating them slightly with hot air - and adapted to any curvature of the ground and earth.
Topseller
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.Suitable retrofit kit Sound: item 8454L 18 x W 3.3 x H 3.3 – 5.2 cm
currently not available
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer.Contents: 6 rubber wheels, 6 rims, 3 steel axles, 6 sockets.Suitable for trailer and semitrailer with up to 3 axles and single tyres.
available
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: DOLL 3-axle dolly.Suitable retrofit kit Sound: item 8456L 21.5 x W 3.5 x H 3.9 cm
currently not available
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
With 2 electrically insulated beams, filigree metal work. Middle crossarm: 3,4 cm. Height: 9,8 cm.
available
The polygonal plates from the stone art series consist of weather resistant mineral composite. This material creates an unmatched realistic stone surface. The plates can be joined together seamlessly without visible gaps. They are flexible and can be easily cut with a knife. Dimensions: L 55,5 x W 16 cm.
Content: 0.0888 qm (€292.23 / 1 qm)
available
The roof plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The plates are flexible and can be easily cut with a knife.
Content: 0.0864 qm (€225.69 / 1 qm)
available
The roof plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The plates are flexible and can be easily cut with a knife.
Content: 0.0864 qm (€219.33 / 1 qm)
available
The roof plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The plates are flexible and can be easily cut with a knife.
Content: 0.551 qm (€138.84 / 1 qm)
few available
The roof plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The plates are flexible and can be easily cut with a knife. Dimensions: L 54 x W 16,3 cm.
Content: 0.088 qm (€181.25 / 1 qm)
available
The street plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The plates are flexible and can be easily cut with a knife. One with two manhole covers and 1 canal lids, 2 plates without any insert.
Content: 0.2641 qm (€179.86 / 1 qm)
currently not available
The wall plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Due to the two-coloured design, the gaps are pointed out optically. The plates are flexible and can be easily cut with a knife. A realistic, weathered surface is provided by some broken and incomplete clinker bricks.
Content: 0.0856 qm (€262.85 / 1 qm)
available
The wall plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Due to the two-coloured design, the gaps are pointed out optically. The plates are flexible and can be easily cut with a knife.
Content: 0.0856 qm (€262.85 / 1 qm)
available
The wall plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Due to the two-coloured design, the gaps are pointed out optically. The plates are flexible and can be easily cut with a knife.
Content: 0.086 qm (€261.63 / 1 qm)
few available
The wall plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Due to the two-coloured design, the gaps are pointed out optically. The plates are flexible and can be easily cut with a knife.
Content: 0.085 qm (€264.71 / 1 qm)
few available
The wall plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Due to the two-coloured design, the gaps are pointed out optically. The plates are flexible and can be easily cut with a knife. A realistic, weathered surface is provided by some broken and incomplete bricks.
Content: 0.0856 qm (€262.85 / 1 qm)
currently not available
The wall plates of the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The plates are flexible and easy to cut with a cutter.
Content: 0.0848 qm (€241.75 / 1 qm)
available
The roof plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The plates are flexible and can be easily cut with a knife.
Content: 0.591 qm (€130.20 / 1 qm)
few available
The wall plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Due to the two-coloured design, the gaps are pointed out optically. The plates are flexible and can be easily cut with a knife.
Content: 0.1819 qm (€195.16 / 1 qm)
available
The wall plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Due to the two-coloured design, the gaps are pointed out optically. The plates are flexible and can be easily cut with a utility knife.
Content: 0.187 qm (€189.84 / 1 qm)
currently not available
The wall plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Due to the two-coloured design, the gaps are pointed out optically. The plates are flexible and can be easily cut with a utility knife.
Content: 0.1802 qm (€197.00 / 1 qm)
currently not available
The wall plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Due to the two-coloured design, the gaps are pointed out optically. The plates are flexible and can be easily cut with a knife. A realistic, weathered surface is provided by some broken and incomplete bricks.
Content: 0.1819 qm (€195.16 / 1 qm)
available
The wall plates of the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The plates are flexible and easy to cut with a cutter.
Content: 0.1802 qm (€138.46 / 1 qm)
available
The asphalt plate from the stone art series consists of weather resistant mineral composite. This material creates an unmatched realistic stone surface. The plates are flexible and can be easily cut with a knife. Due to the plate size particularly versatile usable, e. g. for a construction yard, parking or industrial area. Also suitable for street plates, items 48260 – 48267.L 42 x W 29.7 cm
Content: 0.1247 qm (€236.57 / 1 qm)
currently not available
The Asphalt street from the stone art series consists of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The street is flexible and can be easily cut with a knife. The street comes with 2 manhole covers and 2 canal lids. By light warming up using hot air the material gets flexible and uneven ways are possible to adjust.
Content: 0.75 m (€35.93 / 1 m)
available
The cobblestone plate from the stone art series consists of weather resistant mineral composite. This material creates an unmatched realistic stone surface. The plates are flexible and can be easily cut with a knife. Due to the plate size and the straight laying of the stones particularly versatile usable, e. g. for a market place. Also suitable for cobblestone plates item-No. 48240 – 48247. Dimensions: L 28 x W 16 cm.
Content: 0.045 qm (€576.67 / 1 qm)
available
The deco-set of the stone art series consists of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The set contains 6 tombs and is universally applicable, e. g. for the Vollmer cemeteries item-No. 43860 and 43861.
available
This sub-construction of the stone art series can be cut individually. Offers you to place subsequently buildings on a mountain side on your layout. Suitable for all common model buildings. Dimensions: L 21 x W 0,2 x H 5,6 cm.
available
This pavement of the stone art series consists of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The pavement with 90°-angle fits to corner houses and the surface is designed in concrete appearance. Dimensions: L 10,9 x W 10,9 x H 0,2 cm.
available