Skip to main content Skip to search Skip to main navigation

Product information "0 Colour light entry signal "

Signal in standard construction. Filigree brass mast and authentic varnishing. Flexible mounting by attached screws and mounting clip for carpet layouts. Maintenance free by LED lighting. With 3 LEDs, maintenance free. Signal aspects Hp0, Hp1 and Hp2. Suitable power module: item 5222. Height: 15,5 cm.

Warn- und Sicherheitshinweise

Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Receiver coil for retrofitting CarMotion trucks and buses, inductive charging

Average rating of 0 out of 5 stars

8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm

€9.95*
currently not available
InduktivCharger

Average rating of 0 out of 5 stars

8408 InduktivCharger
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

€129.95*
currently not available
N Castle Branzoll

Average rating of 0 out of 5 stars

37304 N Castle Branzoll
Kit. Mountain included. Manufactured in two-colour injection moulding process.L 34.0 x W 28.0 x H 23.0 cmLevel of difficulty: 2 (advanced)

€62.95*
currently not available
H0 Colour light block signal

Average rating of 0 out of 5 stars

4011 H0 Colour light block signal
Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 2 LEDs, maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: item 5221. Height: 7,9 cm.

€19.50*
available
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
N Sawmill Tonbach with mill-wheel and reciprocating saw

Average rating of 0 out of 5 stars

47713 N Sawmill Tonbach with mill-wheel and reciprocating saw
On the rear side of the nice half-timbered building the sawmill is located. Mill-wheel can be driven by motor item-No. 44200 (additional equipment). Dimensions: L 17 x W 15,5 x H 12 cm

€69.95*
available
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
Electronic relay 2 x 2UM

Average rating of 0 out of 5 stars

5552 Electronic relay 2 x 2UM
2 separate bistable relays, each with 2 contacts. The relays have no time limits but can be used with continuous current. To control colour light signals and semaphore signals, barriers, block- and train change automatic and so on. Control by positive switching impulses resp. by continuous current or AC. Power consumption: 2 x 14 mA. Maximum load for each contact: 2 A.

€37.95*
available
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk