Skip to main content Skip to search Skip to main navigation

Product information "0 Polygonal plate of Stone Art, mediterranean L 55,5 x W 16 cm"

The polygonal plates from the stone art series consist of weather resistant mineral composite. This material creates an unmatched realistic stone surface. The plates can be joined together seamlessly without visible gaps. They are flexible and can be easily cut with a knife. Dimensions: L 55,5 x W 16 cm.

Warn- und Sicherheitshinweise

Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!



Hersteller

Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

4360 N Suspended box girders covering 2 tracks
Equipped with tower mast, ready-to-install and varnished. With 2 electrically insulated beams. With rear side cut-out to accommodate more beams. The beam components are adjustable. Filigree metal work with stamped rivet imitations. Maximum span width: 5,7 cm, height: 8,2 cm.

€35.50*

few available

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk

Average rating of 0 out of 5 stars

5095 H0 Traffic light with pedestrian signal and LEDs, 2 pieces
Traffic lights suitable for epochs III - VI. Each set contains 2 traffic lights, each with a red, yellow and green LED for road traffic and a red and green LED for pedestrians. Suitable for crosswalks as e. g. zebra crossings. Prototypical filigree brass mast with base socket for easy mounting. Maintenance free by LED lighting. Attached electronics controls both traffic lights in an automatic sequence. Height: 6 cm.

€60.50*

available

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk

Average rating of 0 out of 5 stars

6895 High-current cable 0,75 mm², red, 10 m
Litz very flexible. Especially suitable for digital layouts.

Content: 10 m (€1.00* / 1 m)

€9.95*

available

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk

Average rating of 0 out of 5 stars

11752 H0 KALMAR CONTCHAMP with combi unit
Kit. Prototype data: KALMAR CONTCHAMP DRD 450 - 70 C 5XS, payload at max. lifting height 45,000 kg, pulling force 312 kN, operation weight 83,900 kg. 6 cylinder Volvo TWD 1031 VE 4 stroke diesel engine, 235 kW/320 HP. 4 forward gears and 4 reverse gears. With the CONTCHAMP it is possible to transship containers and trailers. Used at all container terminals and transshipment places. L 11.0 x W 5.5 x H 7.0 – 22.0 cm Level of difficulty: 2 (advanced)

€47.95*

currently not available

Average rating of 0 out of 5 stars

5069 H0 Train rear lanterns with LED, 2 pieces
Highly detailed functional lantern for epochs II-III fitting H0 scale waggons. Maintenance free by LED lighting. Scope: 2 LED lights with boards, rectifier and 2 resistors.

€34.50*

available

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk

Average rating of 5 out of 5 stars

8408 InduktivCharger
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

€129.95*

currently not available