Specialist dealer search

Download Center

Service / Help

Experience since 1988

Go to homepage
€0.00*
H0 Barrier support for metal bridges

42535 H0 Barrier support for metal bridges

€6.50*

Prices incl. VAT plus shipping costs

Create review

Delivery time: 2-4 Werktage

Stk
Article no.: 42535

Product information "H0 Barrier support for metal bridges "

Warn- und Sicherheitshinweise

Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!


Hersteller

Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

.PDF
42535 ( 116.87 kb )

Customers also bought

H0 Truss bridge, straight
42545 H0 Truss bridge, straight
Suitable for all common track systems. Road width: 4 cm. Dimensions: L 27 x W 10 x H 5,8 cm.

€31.95*

available

Stk
H0 Confectionery shop with ice cream parlour, interior and LED lighting, functional kit
43683 H0 Confectionery shop with ice cream parlour, interior and LED lighting, functional kit
The attached LED lighting offers the right atmosphere and invites the customer to stay in the shop. Dimensions: L 14,5 x W 12,5 x H 12,5 cm.

€51.50*

available

Stk
H0 Snack bar
45135 H0 Snack bar
Dimensions: L 6,2 x W 6,3 x H 3,6 cm.

€15.95*

currently not available

Go to retailer search
InduktivCharger
8408 InduktivCharger
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

€129.95*

available

Stk
Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm

€9.95*

currently not available

Go to retailer search
H0 Station Willingen
43575 H0 Station Willingen
Kit. We are presenting this new item on the occasion of the 75th Vollmer anniversary in 2021. The construction of the original station in Willingen began in July 1913. However, the entire building was completely destroyed in 1945. Rebuilt, it was getting on in years and in the end was no longerappropriate for a community that lives from tourism. After long negotiations, the grounds were acquired by the community and the present stationwas built, which now meets all requirements. The model is equipped with devices to mount e. g. H0 ceiling spotlight, item 6338 from Viessmann.L 31.7 x W 16 x H 6.91 cm

€78.95*

available

Stk