Specialist dealer search

Download Center

Service / Help

Experience since 1988

Product added to compare
Product Compare added Product Compare
Go to homepage
€0.00*
H0 Signal tower Ottbergen
H0 Signal tower Ottbergen
H0 Signal tower Ottbergen
H0 Signal tower Ottbergen
H0 Signal tower Ottbergen
H0 Signal tower Ottbergen
H0 Signal tower Ottbergen
H0 Signal tower Ottbergen

39318 H0 Signal tower Ottbergen

€42.50*

Prices incl. VAT plus shipping costs

Create review

Delivery time: 2-4 Werktage

available
Stk
Article no.: 39318
Product information "H0 Signal tower Ottbergen "
Kit. The model for the kibri building is the makeshift signal tower Ottbergen centre (Om). It additionally regulated within its area of responsibility the rail transport and rail operations work. The brick building with its tower-like central tract was preserved until demolition in 1982. Suitable roundhouse item 39452 and locomotive platform item 39456.
With connection system.
L 23.5 x W 9.5 x H 13.0 cm
Level of difficulty: 2 (advanced)

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

.PDF
39318 ( 1,563.59 kb )

Passende Artikel

H0 Water tower Ottbergen H0 Water tower Ottbergen
39428 H0 Water tower Ottbergen
Kit. Ø 9.5 x H 20.0 cmLevel of difficulty: 2 (advanced)

€26.95*
available
Stk
H0 Roundhouse Ottbergen, triple track H0 Roundhouse Ottbergen, triple track
39452 H0 Roundhouse Ottbergen, triple track
Kit. With connection system.L 24.0 x W 39.0 x H 15.0 cm / Angle of tracks 15°Level of difficulty: 2 (advanced)

€67.95*
available
Stk

Customers also bought

H0 Boiler house with chimney
39821 H0 Boiler house with chimney
Kit. L 18.0 x W 15.0 x H 37.0 cmLevel of difficulty: 2 (advanced)

€35.50*
available
Stk
H0 Mesh wire fence, grey
38605 H0 Mesh wire fence, grey
Kit. L 280.0 x W 0.2 x H 2.5 cmLevel of difficulty: 1 (beginners)

Content: 2.8 m (€7.48* / 1 m)

€20.95*
available
Stk
InduktivCharger
8408 InduktivCharger
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

€129.95*
currently not available
Go to retailer search
Electronic relay 2 x 2UM
5552 Electronic relay 2 x 2UM
2 separate bistable relays, each with 2 contacts. The relays have no time limits but can be used with continuous current. To control colour light signals and semaphore signals, barriers, block- and train change automatic and so on. Control by positive switching impulses resp. by continuous current or AC. Power consumption: 2 x 14 mA. Maximum load for each contact: 2 A.

€37.95*
available
Stk
Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm

€9.95*
currently not available
Go to retailer search
H0 Factory building of Wilhelminian time
39814 H0 Factory building of Wilhelminian time
Kit. L 27.0 x W 24.0 x H 26.5 cmLevel of difficulty: 2 (advanced)

€99.95*
available
Stk