Specialist dealer search

Download Center

Service / Help

Experience since 1988

Product added to compare
Product Compare added Product Compare
Go to homepage
€0.00*
H0 MAGIRUS DEUTZ 3-axle dump truck, basic, functional model
H0 MAGIRUS DEUTZ 3-axle dump truck, basic, functional model
H0 MAGIRUS DEUTZ 3-axle dump truck, basic, functional model
H0 MAGIRUS DEUTZ 3-axle dump truck, basic, functional model
H0 MAGIRUS DEUTZ 3-axle dump truck, basic, functional model
H0 MAGIRUS DEUTZ 3-axle dump truck, basic, functional model
H0 MAGIRUS DEUTZ 3-axle dump truck, basic, functional model
H0 MAGIRUS DEUTZ 3-axle dump truck, basic, functional model
H0 MAGIRUS DEUTZ 3-axle dump truck, basic, functional model
H0 MAGIRUS DEUTZ 3-axle dump truck, basic, functional model

8018 H0 MAGIRUS DEUTZ 3-axle dump truck, basic, functional model

€239.95*

Prices incl. VAT plus shipping costs

Create review

Delivery time: 2-4 Werktage

available
Stk
Article no.: 8018

weee DE86057721

Product information "H0 MAGIRUS DEUTZ 3-axle dump truck, basic, functional model"
Like all models of the CarMotion series, the vehicle comes with the following functions:
- Charging and programming connection
- Short charging times due to modern lithium polymer batteries
- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.
- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410
- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)
- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor
- Free cargo area due to underfloor drive unit
- Cabin lighting
- Braking and reversing lights
- Direction indicators right/left and warning lights controllable
- Low beam / high beam light
- Roof beacons (depending on type of vehicle)
- Clear seethrough driver‘s cab with figure
- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers
- Compatible with existing systems with contact wire or magnetic tape
- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402
- Even without mechanical guidance a short straight line reverse is possible via steering by the remote control
Prototype data: MAGIRUS DEUTZ all-wheel 3-axle tipper type 230 D 26 AK 6x6, wheelbase 3850/1380 mm, ZF six-gear constant-mesh gearbox AK 6-80, four-stroke V8 Diesel motor type F8L914, performance 169 kW/230 HP, perm. total weight 26 t off-road, trailing load 12 t.
L 8.7 x W 3.2 x H 3.3 cm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

.PDF
8018 ( 3,873.04 kb )

Customers also bought

IR Mini
8403 IR Mini
The module allows the transmission of a variety of commands to CarMotion vehicles via infrared signals. These commands range from simple blinking to deceleration and stopping of CarMotion vehicles, for example in front of traffic lights. The two infrared transmitter diodes can be inconspicuously positioned alongside the road or placed horizontally in a small cut-out in the roadway or roadside. Like the vehicles, the module can be conveniently configured in the CarManager. All macros stored in the vehicles can be invoked by the module, including those that cannot be accessed through magnetic sequences for technical reasons. The two IR LEDs transmit different signals depending on the selected operating mode. One of the numerous applications is precise stopping in front of a traffic light or similar. The first IR LED is positioned some distance before the traffic light and sends the command for gradual deceleration when the traffic light is red. The vehicle then gently comes to a stop on an optional stop magnet (north pole). The second IR LED is located in close proximity to the traffic light and sends the start command when the light is green. The module is directly controlled by the Viessmann traffic light controller, items 5094 or 5095, or the level crossing items 5104 and 510) via the control input. The input also allows control of the module through a switch, relay contact, or DCC switch command using a suitable central control unit. Simple commands can also be generated by turning the module on and off, for example, to send blink commands only when a corresponding turnout is set.Board dimensions with cable outlet: ca. L 45 x W 5 x H 5 mmRecommended installation space (programming plug): ca. L 55 x W 5 x H 5 mmCable length to the IR LEDs: each ca. 300 mmIR LED dimensions: ca. L 2 x W 1.2 x H 1.2 mm

€35.95*
available
Stk
Magnetic tape 0.5 mm, 5 m
8429 Magnetic tape 0.5 mm, 5 m
The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine.W 0.3 x H 0.05 cm

Content: 5 m (€2.79* / 1 m)

€13.95*
available
Stk
H0 CarMotion basic starter set, MAGIRUS DEUTZ 3-axle dump truck
8002 H0 CarMotion basic starter set, MAGIRUS DEUTZ 3-axle dump truck
CarMotion basic starter set consisting of item 8018, H0 MAGIRUS DEUTZ 3-axle dump truck (basic), 1 charger with USB charging cable, item 8400, 12 permanent magnets, item 8431 and 1 magnetic bar.

€264.95*
available
Stk
Programming device for trucks and buses
8401 Programming device for trucks and buses
With the programming device you can make various settings as well as software updates on your CarMotion trucks and buses. With an USB cable it is connected to the charging socket of the vehicle and to the USB-A socket of a computer or a hub, adapter or other. The user-friendly operating software communicates with the vehicle, provides information about the charging status, the distance travelled etc. Furthermore, it enables comfortable setting of various vehicle parameters such as speed, active functions, light brightness and many more. In particular, it is used for setting the desired reactions of the vehicles to the commands that can be triggered by the magnet arrangement in the roadway. Moreover, it is easy to copy configurations between vehicles.

€25.95*
available
Stk
H0 Tandem tipper, red, functional model
8214 H0 Tandem tipper, red, functional model
The trailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer:• Infrared transmitter for distance control• Braking and reversing lights• Direction indicators right/left and warning lights controllableL 8.2 x W 2.9 x H 3.2 – 6.4 cm

€59.95*
available
Stk
Magnetic tape 1 mm, 5 m
8430 Magnetic tape 1 mm, 5 m
The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine. Dimensions: W 0.3 x H 0.1 cm.

Content: 5 m (€3.50* / 1 m)

€17.50*
currently not available
Stk