Specialist dealer search

Download Center

Service / Help

Experience since 1988

Go to homepage
€0.00*
H0 VW Beetle Type 11, 1302, basic, functional model
H0 VW Beetle Type 11, 1302, basic, functional model
H0 VW Beetle Type 11, 1302, basic, functional model
H0 VW Beetle Type 11, 1302, basic, functional model

8090 H0 VW Beetle Type 11, 1302, basic, functional model

€249.95*

Prices incl. VAT plus shipping costs

Create review

scheduled delivery: 2. Quartal 2025

currently not available
Go to retailer search
Go to retailer search
Article no.: 8090

weee DE86057721

Product information "H0 VW Beetle Type 11, 1302, basic, functional model"

Prototype: The VW Beetle Type 11, Version 1302, was manufactured from 1970 to 1972. Equipped with a 1600cc four-cylinder boxer engine, it boasted 50 HP. This model introduced a more modern front axle with MacPherson struts and an independent rear suspension with trailing arms. In 1972, the Beetle surpassed the Ford Model T as the world’s most produced car. Model: The CarMotion variant of this series is prepared for the InduktivCharger, item 8408 and features an integrated receiver coil for wireless charging. Approximately 45 – 60 minutes of runtime under normal driving conditions, up to 30 minutes at maximum speed.
It offers:
• Charging and programming socket
• Fast charging times facilitated by advanced Li-Po batteries
• Approximately 45-60 minutes of runtime under normal driving conditions, up to 30 minutes at maximum speed
• Easy on/off operation with a reed contact located under the roof
• Infrared transmitter/receiver for distance control
• Realistic braking and acceleration manoeuvres
• Interior lighting, brake lights, turn signals, low/high beams
• Visible interior with a driver figure
• Compatibility with guide wire, magnetic tape, and infrared control
• Inductive charging without the need for additional track aids.
L 4.8 x W 1.9 x H 1.7 cm

Warn- und Sicherheitshinweise

Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Customers also bought

InduktivCharger
8408 InduktivCharger
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

€129.95*
currently not available
Go to retailer search
Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm

€9.95*
currently not available
Go to retailer search
H0 Colour light block signal
4011 H0 Colour light block signal
Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 2 LEDs, maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: item 5221. Height: 7,9 cm.

€19.50*
available
Stk
Motorized 2/3-way turnout
8448 Motorized 2/3-way turnout
This turnout is equipped with a powerful and low-noise drive featuring secure positioning achieved by a robust 10 mm motor with planetary gear. By rearranging the variable end stops, a left, right, or 3-way diversion can be selectively created. The electronics are housed compactly within the casing. The diverter can be controlled manually, via buttons/switches or our InduktivCharger, item 8408, enabling digital control capabilities. Like the vehicles, the turnout can be comfortably configured in the CarManager.

€49.95*
currently not available
Go to retailer search
Manual 2/3-way turnout
8445 Manual 2/3-way turnout
Turnout similar to item 8448, equipped with lateral actuation mechanisms (left, right) for manual operation. Ideal for systems controlled solely through our CarMotion remote control, item 8402, and permanent magnets, item 8431 (without wiring).

€16.95*
currently not available
Go to retailer search
Magnetic tape 0.5 mm, 5 m
8429 Magnetic tape 0.5 mm, 5 m
The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine.L 500 x W 0.3 x H 0.05 cm

Content: 5 m (€2.79* / 1 m)

€13.95*
currently not available
Go to retailer search