Specialist dealer search

Download Center

Service / Help

Experience since 1988

Product added to compare
Product Compare added Product Compare
Go to homepage
€0.00*
H0 Front axle complete

8421 H0 Front axle complete

€16.95*

Prices incl. VAT plus shipping costs

Create review

Delivery time: 2-4 Werktage

available
Stk
Article no.: 8421

weee DE86057721

Product information "H0 Front axle complete "
Front axle fully assembled with steering arm and magnet for CarMotion trucks.
L 1.5 x W 2.8 x H 1.3 cm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

.PDF
8421 ( 1,258.74 kb )

Customers also bought

Permanent magnets, 12 pieces
8431 Permanent magnets, 12 pieces
With a series of up to three magnets underneath the road stationary commands can be triggered, e. g. a speed variation or the switching of various light functions.Ø 0.4 x H 0.5 cm

€8.50*
available
Stk
Magnetic tape 1 mm, 5 m
8430 Magnetic tape 1 mm, 5 m
The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine. Dimensions: W 0.3 x H 0.1 cm.

Content: 5 m (€3.50* / 1 m)

€17.50*
available
Stk
InduktivCharger
8408 InduktivCharger
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

€129.95*
Delivery time on request
Go to retailer search
Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm

€9.95*
Delivery time on request
Go to retailer search
H0 MB ACTROS 3-axle articulate truck, basic, functional model
8030 H0 MB ACTROS 3-axle articulate truck, basic, functional model
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlL 8.2 x W 3.5 x H 3.7 cm

€199.95*
available
Stk
H0 Gear unit with motor
8426 H0 Gear unit with motor
High-performance, low-wear motor for underfloor drive with encapsulated gear and one driven axle, suitable for CarMotion vehicles. The rear axle is non-driven and height-adjustable.Operating voltage: 7 – 12 V DCL 4 x W 2.8 x H 1.3 cm

€37.95*
available
Stk