Product information "Accessory set for trucks and buses "
This practical accessory set includes a remote control, 10 meters of magnetic tape (0.5 mm), 10 permanent magnets, as well as a charger and a programming device.
Warn- und Sicherheitshinweise
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!
0 of 0 reviews
Average rating of 0 out of 5 stars
Leave a review!
Share your experiences with other customers.
Login
No reviews found. Share your insights with others.
These LED light strips are intended solely for stationary lighting applications, such as simulating neon tubes in buildings or at train platforms. They are made from flexible material. The LED strips are designed for operation with the power modules, items 5215, 5225, or 5208, or the LED dimmer, item 5590, or with DC voltages of approx. 18 V and above. The included resistors allow for brightness adjustment.Recommended operating voltage: 24 V DC, total current without series resistor: 11 mA. Connection cable included.The light strip, equipped with 5 white (5700k) LEDs, has a total length of approx. 17 mm.
Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: Magirus Deutz 200 D 16 S, 161 kW / 220 HP, engine type F8L 714.Suitable retrofit kit Sound: item 8452L 7.5 x W 3.2 x H 2.9 cm
Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: Magirus Deutz Type 230 D 16 AK, 169 kW / 230 HP, 13-liter displacement, air-cooled V8 direct injection engine, engine series 914, payload ca. 9 t, total permissible weight 38 t.Suitable retrofit kit Sound: item 8452L 7.9 x W 3.2 x H 2.9 – 4.7 cm
Lightweight, high-performance, and compact LiPo pouch cells with built-in protection electronics against overcharging, deep discharge, and overcurrent (short-circuit resistant). Replacement part for MB Actros vehicles, designed for operations with the cells connected in parallel.Nominal voltage 3.7 V, capacity each 60 mAh, maximum charge and discharge current 2 C (120 mA).L 22 x W 12 x H 4.5 mm
These LED light strips are intended solely for stationary lighting applications, such as simulating neon tubes in buildings or at train platforms. They are made from flexible material. The LED strips are designed for operation with the power modules, items 5215, 5225, or 5208, or the LED dimmer, item 5590, or with DC voltages of approx. 18 V and above. The included resistors allow for brightness adjustment.Recommended operating voltage: 24 V DC, total current without series resistor: 11 mA. Connection cable included.The light strip, equipped with 5 warm-white (2200k) LEDs, has a total length of approx. 17 mm.