Skip to main content Skip to search Skip to main navigation

Product information "Smoke generator large, diameter 2,9 cm, with tank "

Burning time of one charge is about 15 minutes. Height: 1,4 cm. Operating voltage: 16 V ~.

Warn- und Sicherheitshinweise

Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Passende Artikel

H0 House on fire H0 House on fire

Average rating of 0 out of 5 stars

43728 H0 House on fire
This building with flame-cut roof truss can be weathered with attached colour tablets. Using Vollmer smoke generator item-No. 44114 and a suitable distillate suitable smoke is generated. Dimensions: L 12 x W 10 x H 14 cm.

€52.50*
available
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
Steam distillate, 50 ml Steam distillate, 50 ml

Average rating of 0 out of 5 stars

6850 Steam distillate, 50 ml
No traces on the loctank, building roofs or lay-on surface. Boil away residue-free. Even non-stop powder aging on vehicles is damage-free.

Content: 0.05 l (€319.00* / 1 l)

€15.95*
available
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk

Customers also bought

H0 Coach lighting, 11 LEDs warm-white

Average rating of 0 out of 5 stars

5050 H0 Coach lighting, 11 LEDs warm-white
Coach lighting with maintenance free, bright LEDs. Brightness adjustable by potentiometer. Can be used in any lighting prepared coaches of all manufacturers. By shortening the circuit board, it can be adapted to various waggon lengths. Constant power supply integrated, prepared for flicker-protection. Power supply by grinder / point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Maximum power input 38 mA. Dimensions: L 25,4 x W 0,7 cm.

€16.50*
available
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
H0 Street plate cobblestone of Stone Art, 3 pieces, L 15 x W 8 cm

Average rating of 0 out of 5 stars

48240 H0 Street plate cobblestone of Stone Art, 3 pieces, L 15 x W 8 cm
The street plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. The plates are flexible and can be easily cut with a knife. One with a manhole cover and 2 canal lids, the other ones without any insert.

Content: 0.036 qm (€625.00* / 1 qm)

€22.50*
currently not available
Receiver coil for retrofitting CarMotion trucks and buses, inductive charging

Average rating of 0 out of 5 stars

8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm

€9.95*
currently not available
H0 Platform Baden

Average rating of 0 out of 5 stars

43562 H0 Platform Baden
Dimensions: L 122 x W 4,8 x H 8,5 cm.

€72.50*
available
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
H0 Motorized point machine for Märklin/Trix C track - replaces 4558

Average rating of 0 out of 5 stars

4568 H0 Motorized point machine for Märklin/Trix C track - replaces 4558
This special point machine is a powerful, silent drive with its respective digital decoder for installation in Märklin and Trix C road bed points. The decoder is located in the cable making the drive particularly compact. The point machine stands out for the prototypical slow movement of the point blades. Speed and motion are controlled electronically and ensure a sensitive drive. If – due to the characteristics of your turnout – the direction of the turnout does not fit with the switching direction of the command station, it is possible to set the point motor to reverse mode. The associated decoder is suitable for DC/AC, MM and DCC and is able to send the requested position or the actual position by RailCom to corresponding digital command stations (e. g. Viessmann Commander item 5300/5320). Analogue mode is possible. Additional switching outputs for relays or LEDs and for a conventional feedback and frog polarisation complete the functions of the point machine. Their function is configurable.Märklin C turnouts:24611 left hand turnout24612 right hand turnout24624 double slip switch DKW24630 three way turnout (2.pieces drives)20671 left curved turnout with manual hand lever20672 right curved turnout with manual hand lever24671 left curved turnout24672 right curved turnout24711 left hand wide radius turnout24712 right hand wide radius turnout24771 curved turnout left24772 curved turnout rightTrix C turnouts:62611 C track left hand turnout62612 C track right hand turnout62624 C track double slip switch 62671 C track left curved turnout62672 C track right curved turnout62711 left hand wide radius turnout62712 right hand wide radius turnout62771 curved turnout left62772 curved turnout right

€55.50*
currently not available
H0 Campfire

Average rating of 0 out of 5 stars

43667 H0 Campfire
If you want to illuminate the model from inside with a red-yellow, flickering light, please use the Viessmann item 5273 Mini-LED red, 3 pieces with micro-blinker electronics.Diameter: 3,5 cm. Height: 3,5 cm.

€11.95*
available
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk