Skip to main content Skip to search Skip to main navigation

Product information "H0 Woman for special services, moving "

With underfloor drive unit. Perfect in combination with the sound module item 5566. Retrofittable for CarMotion with item 8403, IR Mini. Ideally suited for the CarMotion system.
Mounting depth: 39 mm

Warn- und Sicherheitshinweise

Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

InduktivCharger

Average rating of 5 out of 5 stars

8408 InduktivCharger
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

€129.95*
currently not available
Manual 2/3-way turnout

Average rating of 0 out of 5 stars

8445 Manual 2/3-way turnout
Turnout similar to item 8448, equipped with lateral actuation mechanisms (left, right) for manual operation. Ideal for systems controlled solely through our CarMotion remote control, item 8402, and permanent magnets, item 8431 (without wiring).

€16.95*
currently not available
H0 Colour light block signal

Average rating of 0 out of 5 stars

4011 H0 Colour light block signal
Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 2 LEDs, maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: item 5221. Height: 7,9 cm.

€19.50*
available
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
Universal electronics for bus

Average rating of 0 out of 5 stars

8447 Universal electronics for bus
The Universal Electronics Bus provides a compact solution for retrofitting vehicles with the proven driving characteristics of CarMotion trucks. The slim module (approx. W 12 x L 26 mm) is particularly suitable for confined installation situations and operates in conjunction with the H0 gear unit with motor, item 8426. Power is supplied through two 60 mAh batteries included in the set. The module is exclusively designed for use with this motor and batteries. An additional distribution board (approx. W 20 x L 7 mm) facilitates the connection of LEDs for lighting tasks and enables additional light effects. An expansion interface for additional modules is available. Included in the set: Reed contact, Hall sensor, charging and programming socket and 2 batteries. The lighting includes LEDs for the standard lighting of buses: Driver’s cabin (1 x white), front headlights (2 x white), taillight/brake light (4 x), turn signals (8 x yellow), reverse lights (2 x white), 2 IR transmitting diodes, and 2 IR receivers.All LEDs and sensors are pre-wired to ensure easy installation. Supplementary sets for additional light effects are also available.

€94.95*
currently not available
Magnetic tape 0.5 mm, 5 m

Average rating of 0 out of 5 stars

8429 Magnetic tape 0.5 mm, 5 m
The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine.L 500 x W 0.3 x H 0.05 cm

Content: 5 m (€2.79* / 1 m)

€13.95*
currently not available
H0 VW Beetle Type 11, 1302, basic, functional model

Average rating of 0 out of 5 stars

8090 H0 VW Beetle Type 11, 1302, basic, functional model
Prototype: The VW Beetle Type 11, Version 1302, was manufactured from 1970 to 1972. Equipped with a 1600cc four-cylinder boxer engine, it boasted 50 HP. This model introduced a more modern front axle with MacPherson struts and an independent rear suspension with trailing arms. In 1972, the Beetle surpassed the Ford Model T as the world’s most produced car. Model: The CarMotion variant of this series is prepared for the InduktivCharger, item 8408 and features an integrated receiver coil for wireless charging. Approximately 45 – 60 minutes of runtime under normal driving conditions, up to 30 minutes at maximum speed.It offers: • Charging and programming socket • Fast charging times facilitated by advanced Li-Po batteries • Approximately 45-60 minutes of runtime under normal driving conditions, up to 30 minutes at maximum speed • Easy on/off operation with a reed contact located under the roof • Infrared transmitter/receiver for distance control • Realistic braking and acceleration manoeuvres • Interior lighting, brake lights, turn signals, low/high beams • Visible interior with a driver figure • Compatibility with guide wire, magnetic tape, and infrared control • Inductive charging without the need for additional track aids.L 4.8 x W 1.9 x H 1.7 cm

€249.95*
currently not available