2320 H0 Train rear lighting modern, 2 pieces for low side car

This special point machine is a powerful, silent drive with its respective digital decoder for installation in Märklin and Trix C road bed points. The decoder is located in the cable making the drive particularly compact. The point machine stands out for the prototypical slow movement of the point blades. Speed and motion are controlled electronically and ensure a sensitive drive. If – due to the characteristics of your turnout – the direction of the turnout does not fit with the switching direction of the command station, it is possible to set the point motor to reverse mode. The associated decoder is suitable for DC/AC, MM and DCC and is able to send the requested position or the actual position by RailCom to corresponding digital command stations (e. g. Viessmann Commander item 5300/5320). Analogue mode is possible. Additional switching outputs for relays or LEDs and for a conventional feedback and frog polarisation complete the functions of the point machine. Their function is configurable.Märklin C turnouts:24611 left hand turnout24612 right hand turnout24624 double slip switch DKW24630 three way turnout (2.pieces drives)20671 left curved turnout with manual hand lever20672 right curved turnout with manual hand lever24671 left curved turnout24672 right curved turnout24711 left hand wide radius turnout24712 right hand wide radius turnout24771 curved turnout left24772 curved turnout rightTrix C turnouts:62611 C track left hand turnout62612 C track right hand turnout62624 C track double slip switch 62671 C track left curved turnout62672 C track right curved turnout62711 left hand wide radius turnout62712 right hand wide radius turnout62771 curved turnout left62772 curved turnout right

Maintenance free by LED lighting. Height: 7 cm.

The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine. Dimensions: L 500 x W 0.3 x H 0.1 cm.

Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for all track systems.

Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 6 LEDs, maintenance free. White LEDs for signal aspect Sh1 (shunting trip). Signal pictures Hp0, Hp0/Sh1, Hp1 und Hp2. Suitable control module: item 5223. Height: 7,9 cm.

A compact module for easy connection and bright flicker-free LED lighting. The plug-in rail on the top allows a comfortable connection of 12 loads without soldering, just by plugging the leads of resistors and diodes into the sockets of the plug-in rail. Ideal for the interior lighting sets items 6045 – 6048. Cables for connection to a transformer are included. Input voltage 16 V AC, output voltage approx. 22 V DC, max. current 400 mA continuously, overcurrent protection. Plug-in rail is extendable, e. g. item 6049. Provides up to 25 LED lights. Dimensions (without mounting): L 3,7 x W 2,6 x H 2,2 cm.