Specialist dealer search

Download Center

Service / Help

Experience since 1988

Go to homepage
€0.00*
H0 Low side car with cement mixer, functional model for 3-rail systems

2625 H0 Low side car with cement mixer, functional model for 3-rail systems

€167.95*

Prices incl. VAT plus shipping costs

Create review

Delivery time: 2-4 Werktage

available
Stk
Article no.: 2625

weee DE86057721

Product information "H0 Low side car with cement mixer, functional model for 3-rail systems"

Working vehicle for track building, e. g. building fundaments for signal- and catenary system. Equipped with rotative mixing drum. Integrated function decoder for DCC/MM and analogue mode. Function of mixing drum in digital mode switchable and in analogue mode constantly working only while driving into one direction. With standard shaft for couplers, coupler dummies and system couplers attached. Metal wheels. Dimensions: Lob 15,8 x W 3,6 x H 5 cm.

Warn- und Sicherheitshinweise

Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

.PDF
2625 ( 857.28 kb )

Customers also bought

InduktivCharger
8408 InduktivCharger
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

€129.95*
currently not available
Go to retailer search
Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm

€9.95*
currently not available
Go to retailer search
House illumination with 1 LED warm-white,10 pieces
6006 House illumination with 1 LED warm-white,10 pieces
Ideal item to use with our light boxes of house lighting starter set, item 6005 to illuminate each single room or with light rails, item 6045 for floor interior lighting. One LED each, fastened to a small board, provides suitable brightness.

€28.50*
available
Stk
H0 Colour light block signal
4011 H0 Colour light block signal
Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 2 LEDs, maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: item 5221. Height: 7,9 cm.

€19.50*
available
Stk
H0 Coach lighting, 11 LEDs yellow
5049 H0 Coach lighting, 11 LEDs yellow
Coach lighting with maintenance free, bright LEDs. Brightness adjustable by potentiometer. Can be used in any lighting prepared coaches of all manufacturers. By shortening the circuit board, it can be adapted to various waggon lengths. Constant power supply integrated, prepared for flicker-protection. Power supply by grinder / point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Maximum power input 38 mA. Dimensions: L 25,4 x W 0,7 cm.

€16.50*
available
Stk
N Whip street light, LED white, 5+1
64906 N Whip street light, LED white, 5+1
Street light epochs III – VI. Maintenance free by LED lighting. Prototypical brass mast with base socket for easy mounting. Economic set with 6 lights item 6490 for the price of 5. Height: 5,4 cm.

€64.95*
available
Stk