2652 H0 Tamping machine LEONHARD WEISS, P & T, functional model for 2 rail version

The module allows the transmission of a variety of commands to CarMotion vehicles via infrared signals. These commands range from simple blinking to deceleration and stopping of CarMotion vehicles, for example in front of traffic lights. The two infrared transmitter diodes can be inconspicuously positioned alongside the road or placed horizontally in a small cut-out in the roadway or roadside. Like the vehicles, the module can be conveniently configured in the CarManager. All macros stored in the vehicles can be invoked by the module, including those that cannot be accessed through magnetic sequences for technical reasons. The two IR LEDs transmit different signals depending on the selected operating mode. One of the numerous applications is precise stopping in front of a traffic light or similar. The first IR LED is positioned some distance before the traffic light and sends the command for gradual deceleration when the traffic light is red. The vehicle then gently comes to a stop on an optional stop magnet (north pole). The second IR LED is located in close proximity to the traffic light and sends the start command when the light is green. The module is directly controlled by the Viessmann traffic light controller, items 5094 or 5095, or the level crossing items 5104 and 510) via the control input. The input also allows control of the module through a switch, relay contact, or DCC switch command using a suitable central control unit. Simple commands can also be generated by turning the module on and off, for example, to send blink commands only when a corresponding turnout is set.Board dimensions with cable outlet: ca. L 45 x W 5 x H 5 mmRecommended installation space (programming plug): ca. L 55 x W 5 x H 5 mmCable length to the IR LEDs: each ca. 300 mmIR LED dimensions: ca. L 2 x W 1.2 x H 1.2 mm

In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: tanker semitrailer STA 22, capacity 37,200 l.L 17.1 x W 3.5 x H 3.9 cm

Kit. With connection system.L 24.0 x W 39.0 x H 15.0 cm / Angle of tracks 15°Level of difficulty: 2 (advanced)

The ROBEL track motor car with underfloor drive unit is a sophisticated piece of working equipment, which - due to its considerable pulling power - may well be used for transfer runs to remote rail customers. Highlight is the movable crane which rotates nearly unlimited motor-driven even to left and right side. The crane arm elevates from cargo area and afterwards moves down beside the tracks. The working base is changeable with the crane hook. By proceed at reduced speed, operation with sound, analogue and digital ROBEL sophisticates. Universally applicable and a must have on your layout. With electrical drive unit, directional headlights 3 white headlights resp. red tail lights, yellow warning light and white cab lighting. The integrated sound module generating various operating sounds, - pivoting coupler pockets as per NEM 362 at both ends. Load compensation in running mode (digital), - prototypical maximum speed even in analogue mode due to automatic adaptation to excessive supply voltage, - supporting RailCom datagram command confirmations, CV content, address broadcast. With close-coupling kinematics and attached coupler. Dimensions: Lob 13,4 x W 3,6 x H 4,8 cm.

Together with McDonald`s Germany this model was developed and approved. Depending on the outside space McCafé area and/or a bigger restaurant area are offered. Flexibility even on your layout. We thank McDonald‘s Germany for their support. With interior, 4 sunshades, 2 banners and mast with McDonald`s logo. Dimensions: L 17,5x W 16 x H 10 cm.

Kit. Loading material on the model train. As different as freight cars in original and model the loading is very special, too. Storage shed and loading equipment are inseparably connected. Small freight sheds with loading ramp in the main line or the comfortable big warehouse in your own freight depot – the cargo handling of goods simply belongs to every model train. By the way – great possibilties to be creative. L 12.5 x W 5.0 x H 13.0 cmPassage height 8.0 – 10.0 cm / Passage width 8.5 cmLevel of difficulty: 2 (advanced)