Product added to compare
Product information "H0 Semaphore home signal with 2 coupled arms "
With filigree latticed brass mast and authentic varnishing, printed signal arms and underfloor drive unit with integrated automatic train control. Maintenance free due to LED lighting. Signal pictures Hp0 and Hp2. Height: 103 mm.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Customers also bought

4500 H0 Semaphore home signal, single-arm
With filigree latticed brass mast and authentic varnishing, printed signal arms and underfloor drive unit with integrated automatic train control. Maintenance free due to LED lighting. Signal pictures Hp0 and Hp1. Height: 103 mm.

€63.95*
available
Stk
6087 H0 Wall lamp for goods shed, LED warm-white
This basic wall lamp is ideal for storage buildings, sheds and depots for the epoch III. Maintenance free by LED lighting.

€13.50*
available
Stk
5017 H0 Conducting magnetic couplers, 2-pole, 3 pair
These couplers allow you to provide an easy power supply system for the entire train. The couplers are equipped completely with 2 connection cables and fit into the standard NEM 362 coupling shaft. The couplers are contact-proof and cannot be uncoupled automatically, yet easy to separate and to couple. The thin cables (0.6 mm) allow a very easy mounting. Current consumption: max. 750 mA.Contents: 3 pairs with 3 adapters each (S: norm, M: +0.3 mm and L: +0.6 mm).

€24.50*
Delivery time on request
Stk
8429 Magnetic tape 0.5 mm, 5 m
The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine.W 0.3 x H 0.05 cm

Content: 5 m (€2.79* / 1 m)

€13.95*
available
Stk
6049 Plug-in rail for interior lighting on board, 12-pole
The practical 12-pin plug-in rail connects up to 12 power consumers – simply by jacks for plugging in the resistors and diodes. Suitable for using with LED-floor interior lighting items 6045 – 6048. No plugs, screw terminals or soldering required. In order to make even very thin cables and litz wires pluggable, we recommend the adapter pins for rails, item 6044. Dimensions: L 3,2 x W 2,1 x H 0,7 cm.

€8.95*
available
Stk
8408 InduktivCharger
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

€129.95*
Delivery time on request