4509 H0 Semaphore distant signal, movable disk
€77.50*
Delivery time: 2-4 Werktage
Article no.: 4509
weee DE86057721
Login
Customers also bought
available
Article no.: 4509
weee DE86057721
Product information "H0 Semaphore distant signal, movable disk "
With filigree brass mast and authentic varnishing. For authentic slow motion function only item 5216 slow speed resistor is required. Integrated main switching contacts arrange authentic stop. Next main signal shows stop. With printed signal disk, bulbs and underfloor drive unit. Signal aspects Vr0 and Vr1. Spare bulb: Item 6200. Height: 5,1 cm.
8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
€9.95*
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm
currently not available
8408 InduktivCharger
€129.95*
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm
currently not available
4011 H0 Colour light block signal
€19.50*
Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 2 LEDs, maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: item 5221. Height: 7,9 cm.
available
5552 Electronic relay 2 x 2UM
€37.95*
2 separate bistable relays, each with 2 contacts. The relays have no time limits but can be used with continuous current. To control colour light signals and semaphore signals, barriers, block- and train change automatic and so on. Control by positive switching impulses resp. by continuous current or AC. Power consumption: 2 x 14 mA. Maximum load for each contact: 2 A.
available
4519 H0 Wait signal with light
€27.95*
With filigree brass mast, authentic varnishing and base socket for easy mounting. With 3 LEDs, maintenance free. Signal aspect Ra11. Height: 6,5 cm.
available
6006 House illumination with 1 LED warm-white,10 pieces
€28.50*
Ideal item to use with our light boxes of house lighting starter set, item 6005 to illuminate each single room or with light rails, item 6045 for floor interior lighting. One LED each, fastened to a small board, provides suitable brightness.
available