4510 H0 Semaphore distant signal, fixed disk, movable arms
€82.50*
Delivery time: 2-4 Werktage
Article no.: 4510
weee DE86057721
Login
Customers also bought
available
Article no.: 4510
weee DE86057721
Product information "H0 Semaphore distant signal, fixed disk, movable arms"
With filigree brass mast and authentic varnishing. For authentic slow motion function only item 5216 slow speed resistor is required. Integrated main switching contacts arrange authentic stop. Next main signal shows stop. With printed signal disk and signal arm, bulbs and underfloor drive unit. Signal aspects Vr0 and Vr2. Spare bulb: Item 6200. Height: 5,1 cm.
8408 InduktivCharger
€129.95*
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm
currently not available
5549 Universal push-button panel, feedback, 2-aspect
€31.95*
Feedback compatible push-button panel with impulse-contact for four semaphore signals with 2 aspects, tracks or universal relay, item 5551. Authentic feedback of the signals, tracks or relays by 8 red and green LEDs. Several panels can be stringed together. Only useable for signals with automatic deactivation via mechanical contacts. Contact load: 2 A.
available
8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
€9.95*
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm
currently not available
4701 H0 Digital semaphore home signal, with 2 coupled arms
€102.95*
With filigree latticed brass mast and authentic varnishing. Printed signal arms. Integrated multi protocol digital decoder for DCC/MM provides for an authentic arm movement. Slow signal movement due to special underfloor drive unit. Even authentic single bouncing is individually adjustable. In its delivery status, the bouncing is already adjusted. The compact overfloor drive is includes a decoder placed on the signal mast base. Maintenance free by LED lighting. Suitable for analogue and digital use. Configurable switching outputs can switch relays, e. g. for train control. Feedback via RailCom. For train control it is important to use a relay, due to the low maximum load of the contacts and the short pulse length, e. g. the electronic relay item 5552. With powerful low noise drive. Signal aspects Hp0 und Hp2. Height: 10,3 cm. Drive unit: L 3,5 x W 1,6 x H 0,45 cm.
available
8447 Universal electronics for bus
€94.95*
The Universal Electronics Bus provides a compact solution for retrofitting vehicles with the proven driving characteristics of CarMotion trucks. The slim module (approx. W 12 x L 26 mm) is particularly suitable for confined installation situations and operates in conjunction with the H0 gear unit with motor, item 8426. Power is supplied through two 60 mAh batteries included in the set. The module is exclusively designed for use with this motor and batteries. An additional distribution board (approx. W 20 x L 7 mm) facilitates the connection of LEDs for lighting tasks and enables additional light effects. An expansion interface for additional modules is available. Included in the set: Reed contact, Hall sensor, charging and programming socket and 2 batteries. The lighting includes LEDs for the standard lighting of buses: Driver’s cabin (1 x white), front headlights (2 x white), taillight/brake light (4 x), turn signals (8 x yellow), reverse lights (2 x white), 2 IR transmitting diodes, and 2 IR receivers.All LEDs and sensors are pre-wired to ensure easy installation. Supplementary sets for additional light effects are also available.
currently not available
4509 H0 Semaphore distant signal, movable disk
€77.50*
With filigree brass mast and authentic varnishing. For authentic slow motion function only item 5216 slow speed resistor is required. Integrated main switching contacts arrange authentic stop. Next main signal shows stop. With printed signal disk, bulbs and underfloor drive unit. Signal aspects Vr0 and Vr1. Spare bulb: Item 6200. Height: 5,1 cm.
available