Specialist dealer search

Download Center

Service / Help

Experience since 1988

Product added to compare
Product Compare added Product Compare
Go to homepage
€0.00*
H0 Hobby colour light entry signal

4022 H0 Hobby colour light entry signal

€57.50*

Prices incl. VAT plus shipping costs

Create review

Delivery time: 2-4 Werktage

available
Stk
Article no.: 4022

weee DE86057721

Product information "H0 Hobby colour light entry signal "
Signal in standard construction with filigree latticed brass mast, authentic varnishing, maintenance free, with electronics and automatic train control. With 3 LEDs, Signal pictures Hp0, Hp1 and Hp2. Height: 8,6 cm.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

.PDF
4022 ( 880.62 kb )

Passende Artikel

Control module for colour light distant signal
5220 Control module for colour light distant signal
Useable in connection with control modules for colour light signals items 5221 – 5223 and hobby light signals, item 4021, 4022. The module offers 3 possible distant signal aspects (Vr0, Vr1 and Vr2). Authentic smooth switch of signal aspects. By masking the stop showing home signal fixed on the same mast the distant signal is switched off.

€31.95*
available
Stk
Push-button panel 3-aspect
5546 Push-button panel 3-aspect
With impulse contact for two 3-aspect semaphore signals and also for hobby entry signals, items 4021, 4022, the signal control module item 5210 and control module for colour light entry signals item 5222. For activating the signal aspects stop, proceed, proceed at reduced speed and stop for shunting movements by control module item 5210 as well as the control module for colour light signals item 5222. Operation in analogue mode with control module items 5224 and 5229 when 3-aspect signals are connected. For 3-rail turnouts use diode item 6834. Several panels may be connected. Contact rating: Up to 2 A.

€26.95*
available
Stk

Customers also bought

H0 VW Beetle Type 11, 1302, basic, functional model
8090 H0 VW Beetle Type 11, 1302, basic, functional model
Prototype: The VW Beetle Type 11, Version 1302, was manufactured from 1970 to 1972. Equipped with a 1600cc four-cylinder boxer engine, it boasted 50 HP. This model introduced a more modern front axle with MacPherson struts and an independent rear suspension with trailing arms. In 1972, the Beetle surpassed the Ford Model T as the world’s most produced car. Model: The CarMotion variant of this series is prepared for the InduktivCharger, item 8408 and features an integrated receiver coil for wireless charging. Approximately 45 – 60 minutes of runtime under normal driving conditions, up to 30 minutes at maximum speed.It offers: • Charging and programming socket • Fast charging times facilitated by advanced Li-Po batteries • Approximately 45-60 minutes of runtime under normal driving conditions, up to 30 minutes at maximum speed • Easy on/off operation with a reed contact located under the roof • Infrared transmitter/receiver for distance control • Realistic braking and acceleration manoeuvres • Interior lighting, brake lights, turn signals, low/high beams • Visible interior with a driver figure • Compatibility with guide wire, magnetic tape, and infrared control • Inductive charging without the need for additional track aids.L 4.8 x W 1.9 x H 1.7 cm

€249.95*
Delivery time on request
Go to retailer search
H0 Wall lamp for goods shed, LED warm-white
6087 H0 Wall lamp for goods shed, LED warm-white
This basic wall lamp is ideal for storage buildings, sheds and depots for the epoch III. Maintenance free by LED lighting.

€13.50*
available
Stk
H0 Semaphore home signal with 2 coupled arms
4501 H0 Semaphore home signal with 2 coupled arms
With filigree latticed brass mast and authentic varnishing, printed signal arms and underfloor drive unit with integrated automatic train control. Maintenance free due to LED lighting. Signal pictures Hp0 and Hp2. Height: 103 mm.

€73.95*
available
Stk
InduktivCharger
8408 InduktivCharger
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

€129.95*
Delivery time on request
Go to retailer search
Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm

€9.95*
Delivery time on request
Go to retailer search
H0 Front axle complete
8421 H0 Front axle complete
Front axle fully assembled with steering arm and magnet for CarMotion trucks.L 1.5 x W 2.8 x H 1.3 cm

€16.95*
available
Stk