Product added to compare
Product information "H0 DOLL pole trailer "
Kit.
L 16.0 x W 4.0 x H 4.7 – 13.0 cm
Level of difficulty: 2 (advanced)

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Passende Artikel

8424 H0 Retrofit set steered rear axles for semitrailers
These steered axles for semitrailers are excellently suited for driving smaller radii even with longer semitrailers, without having to widen the roads very much in the curves or the semitrailers getting too far into the lane of opposite traffic. Precisely guided by ball bearing mounted cogwheel mechanism.

€43.50*
currently not available
12254 H0 MB TRAC with front shield, wood-pulling shovel and rear winch
Kit. Prototype data: The double drum winch 8002 TL of company IGLAND has a pulling power of 2 x 8.0 t and a max. rope capacity of 2 x 107.0 m for a rope diameter of 12.0 mm. With a power requirement of 53 HP per drum the MB TRAC is the correct tractor to drive the winch. As the winch is mounted in the rear linkage only, the tractor can still be used in agriculture. With the shield, which can be mounted to any front loader, the wood can be sorted at the lumberyard. The kit includes 6 trunks.L 8.5 x W 3.0 x H 4.0 – 6.0 cm Level of difficulty: 2 (advanced)

€29.50*
available
Stk

Customers also bought

4568 H0 Motorized point machine for Märklin/Trix C track - replaces 4558
This special point machine is a powerful, silent drive with its respective digital decoder for installation in Märklin and Trix C road bed points. The decoder is located in the cable making the drive particularly compact. The point machine stands out for the prototypical slow movement of the point blades. Speed and motion are controlled electronically and ensure a sensitive drive. If – due to the characteristics of your turnout – the direction of the turnout does not fit with the switching direction of the command station, it is possible to set the point motor to reverse mode. The associated decoder is suitable for DC/AC, MM and DCC and is able to send the requested position or the actual position by RailCom to corresponding digital command stations (e. g. Viessmann Commander item 5300/5320). Analogue mode is possible. Additional switching outputs for relays or LEDs and for a conventional feedback and frog polarisation complete the functions of the point machine. Their function is configurable.Märklin C turnouts:24611 left hand turnout24612 right hand turnout24624 double slip switch DKW24630 three way turnout (2.pieces drives)20671 left curved turnout with manual hand lever20672 right curved turnout with manual hand lever24671 left curved turnout24672 right curved turnout24711 left hand wide radius turnout24712 right hand wide radius turnout24771 curved turnout left24772 curved turnout rightTrix C turnouts:62611 C track left hand turnout62612 C track right hand turnout62624 C track double slip switch 62671 C track left curved turnout62672 C track right curved turnout62711 left hand wide radius turnout62712 right hand wide radius turnout62771 curved turnout left62772 curved turnout right

€55.50*
available
Stk
38655 H0 Deco set Office furniture
Kit. Level of difficulty: 1 (beginners)

€15.50*
currently not available
39307 H0 Loco shed, single track
Kit. The gates are manually movable. L 22.0 x W 10.5 x H 11.0 cmLevel of difficulty: 2 (advanced)

€42.95*
available
Stk
38142 H0 Deco set Bus stop
Kit. Bus stop L 6.0 x W 3.3 x H 3.2 cmAdvertising column Ø 1.4 x H 3.7 cmLevel of difficulty: 1 (beginners)

€9.50*
available
Stk
39995 Plastic glue liquid, with brush, 25 ml

Content: 0.025 l (€278.00* / 1 l)

€6.95*
available
Stk
37031 N Village church Sertig
Kit. L 9.5 x W 7.8 x H 13.5 cmLevel of difficulty: 2 (advanced)

€17.50*
available
Stk