4200 TT Starter set Catenary

In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab and a tipping container. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlL 8.4 x W 3.5 x H 3.7 – 6.1 cm

Suitable for road bed tracks Märklin C-track, Trix, Roco GEO-Line and Piko A-track. Compatible with all Viessmann H0 light signals with base socket.L 3.06 x W 2 x H 0.95 cm

Ready-to-install catenary wires with fixing holders for easy hooking onto the beam. Suitable for Tillig ballast- and model track. Diameter 0,5 mm.

Equipped with tower mast, ready mounted and varnished. With 2 electrically insulated beams. The beam components are adjustable. With rear side cut-out to accommodate more beams. Filigree metal work with stamped rivet imitations. Maximum span width: 7,3 cm, height: 10,9 cm.

With beam, filigree metal work. Middle crossarm: 3,4 cm. Height: 9,9 cm.

Signal in standard construction. Very easy assembly. Metal construction, fully painted. With base socket. With 3 LEDs, maintenance free. Signal aspects Hp0, Hp1, Hp2. Suitable control module: item 5222. Height: 7,9 cm.