4214 TT Catenary mast

Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for Tillig H0-Elite (radius 366 mm).

The semitrailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer:• Infrared transmitter for distance control• Braking and reversing lights• Direction indicators right/left and warning lights controllableL 8.5 x W 2.9 x H 4.2 cm

Save the climate on your model railway! Wind power plant with rotating wings. Maintenance free by LED lighting. Height: 58 cm, base diameter: 3,7 cm.

Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.L 8.6 x W 3.3 x H 3.3 cm

This special point machine is a powerful, silent drive with its respective digital decoder for installation in Märklin and Trix C road bed points. The decoder is located in the cable making the drive particularly compact. The point machine stands out for the prototypical slow movement of the point blades. Speed and motion are controlled electronically and ensure a sensitive drive. If – due to the characteristics of your turnout – the direction of the turnout does not fit with the switching direction of the command station, it is possible to set the point motor to reverse mode. The associated decoder is suitable for DC/AC, MM and DCC and is able to send the requested position or the actual position by RailCom to corresponding digital command stations (e. g. Viessmann Commander item 5300/5320). Analogue mode is possible. Additional switching outputs for relays or LEDs and for a conventional feedback and frog polarisation complete the functions of the point machine. Their function is configurable.Märklin C turnouts:24611 left hand turnout24612 right hand turnout24624 double slip switch DKW24630 three way turnout (2.pieces drives)20671 left curved turnout with manual hand lever20672 right curved turnout with manual hand lever24671 left curved turnout24672 right curved turnout24711 left hand wide radius turnout24712 right hand wide radius turnout24771 curved turnout left24772 curved turnout rightTrix C turnouts:62611 C track left hand turnout62612 C track right hand turnout62624 C track double slip switch 62671 C track left curved turnout62672 C track right curved turnout62711 left hand wide radius turnout62712 right hand wide radius turnout62771 curved turnout left62772 curved turnout right

Marking aid for marking the locations of the permanent magnets, item 8431 at the correct spacing relative to each other, in a magnetic sequence, and with respect to magnetic tape, items 8429/8430.L 7 x W 3 x H 0.4 cm