4910 TT Colour light distant signal

Signal in standard construction. Filigree brass mast and authentic varnishing. With base socket for easy mounting. With each 2 red and white LEDs maintenance free. Signal pictures Sh0 and Sh1. Suitable control module: item 5221. Height: 3,5 cm.

available

2 separate bistable relays, each with 2 contacts. The relays have no time limits but can be used with continuous current. To control colour light signals and semaphore signals, barriers, block- and train change automatic and so on. Control by positive switching impulses resp. by continuous current or AC. Power consumption: 2 x 14 mA. Maximum load for each contact: 2 A.

available

Length of wire: ca. 2 cm.

available

The ideal solution for stable and powerful switching current as well as bright and flicker-free LED-lighting. To increase the switching power of digital decoders with separate voltage feed. For connection to the decoders items 5211, 5231 and 5280. Suitable for all decoders even from other producers in case an external power supply input is offered. One power module is able to supply up to 100 LED lights and several digital signals and decoders. Power rating: 2A.

available

Ideal item to use with our light boxes of house lighting starter set, item 6005 to illuminate each single room or with light rails, item 6045 for floor interior lighting. One LED each, fastened to a small board, provides suitable brightness.

available

To equip thin wires and litz wires to make them pluggable, e. g. in connection with Viessmann plug-in rail item 6049 or the power module with plug-in rail item 5205. By using adapter pins even very thin wires without resistors and diodes can be plugged in. The wires are injected in the adapter pin without soldering.

available