Einige einfach Modifikation lösen würde Rangieren Arbeit Pro

  • ===================DE======================


    Hallo!


    PROBLEM ERKLÄRUNG am Beispiel:
    Einige Depot an Bahnübergängen Layouts haben keine Turn-Table!
    Daher können Sie nicht drehen Lokomotiven!
    Dennoch können fast alle modernen Lokomotiven jede Seite als Vorderseite zu verwenden!


    Betrachten wir eine solche Situation:
    Lokomotive wird von Depot-Umzug in Empfang Abfahrt Hof mit Kommandant.
    Lokomotive in Zug kommen, so dass seine vordere Kabine gerade auf vagon.
    Als Ergebnis muss Lokomotive Lokomotive mit umgekehrter Richtung zu arbeiten.
    Wenn wir eine Route starten wir falsche Richtung der Zug Bewegung und Crash haben wird geschehen!
    Verwendung von Decoder "CV" s für die Umkehr ist nicht bequem!


    Ich SCHLAGEN:
    Bitte erlauben Platzierung 2 Checkboxen bei der Wahl Menü Lokomotiven für ZNR Felder Spur Diagramm.
    Richtung:
    (*) - Forvard
    (*) - Reverse-
    Und verwenden Sie dieses Flag auf "Commander"-Logik.


    Es wäre äußerst praktisch!


    FOR FUTURE:
    Bitte korrigieren Sie die Logik der Firmware, wo Richtung Auswahl der Bewegung in Strecken eindeutig mit Track-Plan verbunden wäre, mit Start-und End Kontakte unabhängig von Richtung Lokomotive. Richtung der Lok muss in ZNR Menü choosed, und dann ging für alle Routen von Relais - Rennen automatisch.
    Beim Rangieren (Lokwechsel) diese Richtung muss sich leicht in ZNR Menü korrigiert werden.

    -----------
    Vadim


    ===================EN======================


    Hello!


    PROBLEM EXPLANATION at EXAMPLE:
    Some depot at railroad layouts have not any Turn-Table!
    Therefore, You cannot rotate locomotives !
    Nevertheless, almost all modern locomotives can use each side as front side!


    Let us consider such situation:
    Locomotive is moving from depot into receiving-departure yard by using Commander.
    Locomotive join into train so that its front cabine watching onto vagon.
    As a result, locomotive must work as locomotive with reverse direction.
    If we launch a route we will have wrong direction of train motion and crash will happened!
    Usage of Decoder "CV"s for reversing is not convenient!


    I SUGGEST:
    Please allow placing 2 checkboxes at menu of choosing locomotives for ZNR fields at track diagramm.
    Direction:
    (*) - Forvard
    (*) - Reverse
    And use this Flag at "Commander" logic.


    It would be extremely convenient!


    FOR FUTURE:
    Please correct logic of firmware where direction selection of motion in routes would be unambiguously associated with track-plan, using start and end contacts irrespective from direction of locomotive. Direction of locomotive must be choosed in ZNR menu, and, then, passed for all routes by relay - race automatically.
    During shunting (locomotive change) this direction must be easily corrected in ZNR menu.

    -----------
    Vadim