Version 1.021

norsktog · 5. August 2008

I had version 1.016, updated to 1.018 and then to 1.021. Since then I have had problems with the commander.
I have problems with many of the touch fields, they don't work.
After having edited a loco, I am not able to go to next index card (CV etc)
Exit meny don't work at any time.
Save button don't work.
I have tried to re-install the 1.021, but now the computer can't find the Commander.
What has gone wrong?

Björn

I have managed to re-install the 1.021, but still no reaction to buttons, mainly on the right side of the display.

Ingo Planert · 5. August 2008

Dear Björn,

after an update it is advisable to recalibrate the touch of the display (system parameters - display - display calibration).

After that the touch fields should work correctly again.

Regarding the re-installing please set back your Computer's COM-Port number to COM1:

System - Hardware - Device Manager - Ports (COM and LPT) - USB Serial Port (COM...)

For this you have to connect your Commander first. If you make a double-click on "USB Serial Port (COM...)" you will get the property window. Select the card "Port Settings", than press "Advanced". Now you can change the COM port number to COM1.

Best regards,

Ingo Planert
Viessmann Modellspielwaren GmbH

norsktog · 5. August 2008

Thank you, I have calibrated, and all touch buttons work, beaufifull !!!! What a relief!!

Björn

Rick · 5. August 2008

Hallo Herr Planert,

da dieses Symptom mehrfach aufgetreten ist ( bei mir auch ), könnte es mit
dem Update tatsächlich zusammenhängen.
Vielleicht sollte man dem Info-Dokument zum Update einen Hinweis dahingehend
beifügen, das eine Kalibirierung bei diesem Update empfohlen ist.

Grüße
Rick

Ingo Planert · 5. August 2008

Hallo Rick,

danke für den Tipp, ist erledigt! Der Hinweis ist in das PDF aufgenommen.

Viele Grüße an meine alte Heimat (komme aus Peine),

Ingo Planert
Viessmann Modellspielwaren GmbH

Rick · 5. August 2008

Besten Dank!

Teilen