loco does not reverse under automatic control

    Hello forum,


    I got the automatic control working using the 5 feedback track example provided in the manual.


    Initially I did all testing with my V36 Marklin 37365 loco. Evenutually I got it working, then added a small wagon as well, results are the same.


    Now when I try my v280 from 26541 set (Bamberger) the loco completes the first route and arrives at the station and pauses for 5 seconds. Upon starting the second route, the loco continues forward and not in reverse.


    Any clues on how to fix this?


    Many thanks!

    Hallo,
    is v280 too long for the stop section?
    Is the v280 touching an other section with start options?

    Viel Grüße
    Dieter Riethenauer


    Commander 1.402, seit 12.07, Fleischm.profigleise N
    Viessmann u. Uhlenbrock Schalt/Magnetartikeldekoder
    Rocco RM 10787 am LSB hinter Viessmann BM 5206,
    Viessmann Booster ECO4, Win 10- 64bit

    Hi tworail,


    When does your reverse command come: at the end of the first route, or at the beginning of the second one?


    I suggest the following if it's not already the case,
    - At the end of the first route, simply use a "stop" command (with NO reverse command).
    - At the beginning of the second route, input a "stop-reverse" command, and then all your usual commands (including a "run" one of course :D ).


    I remember having a similar problem and this has solved the issue.


    Pierre