Backup Programme Suggestions

  • Hallo


    1. When making a backup the system seems to choose the name of the backup file. The problem is that when making a second backup it overwrites the first backup file. This is not a good practice in my opinion as with only one file it could be corrupted and not suitable to be reloaded.


    Is there a solution to this problem please?


    2. Can we have a backup programme in with English words please?


    John

    Commander with S88 Littfinski feedback for track monitoring and reed switches.


    5 amp booster connected to the CDE port.


    Lenz LI-USB interface connecting to a laptop via the LSB bus using RocRail software to drive trains manually via an Android phone.

  • Hi John,


    change the name of the first backup in your PC.


    Eddie

    Spur N, zweigleisige Hauptstrecke (Hundeknochen), eingleisige Nebenstrecke, ca 25 Züge Epoche IV, Fahrbetrieb Automatik funktioniert, Lenz Gold mini und Silver+ Decoder,ESU Decoder, 8x Viessmann 5233,
    Commander 1.402 seit Dez. 2007, Windows Vista

  • Hi Eddie


    Thank you for your suggestion. Have you tried to reload the file with the new name to see if it is okay?


    John

    Commander with S88 Littfinski feedback for track monitoring and reed switches.


    5 amp booster connected to the CDE port.


    Lenz LI-USB interface connecting to a laptop via the LSB bus using RocRail software to drive trains manually via an Android phone.

  • Hallo John,


    that is working without problems.

    Viel Grüße
    Dieter Riethenauer


    Commander 1.402, seit 12.07, Fleischm.profigleise N
    Viessmann u. Uhlenbrock Schalt/Magnetartikeldekoder
    Rocco RM 10787 am LSB hinter Viessmann BM 5206,
    Viessmann Booster ECO4, Win 10- 64bit

  • Hello John.


    I'm tring to back up my data on the PC but unfortunately I don't find the freeware software on the Viessmann site. Please could you help me in finding it?
    Thanks very much.
    Regards
    Alessandro

  • Hello Alessandro


    You are correct the backup programme is not on the Viessmann web site as far as I can see.


    It is on the disk you received with your Commander. Failing this you will have to contact Viessmann direct.


    John

    Commander with S88 Littfinski feedback for track monitoring and reed switches.


    5 amp booster connected to the CDE port.


    Lenz LI-USB interface connecting to a laptop via the LSB bus using RocRail software to drive trains manually via an Android phone.