Help with 5206 and 5224

  • I'm currently building a 122cm x 122cm swiss themed n scale layout, with a double track mainline. I plan to use MicroScale signals, dividing each loop into two blocks. Now, there are small sections at the end of each block that won't be protected, as I don't want the signal to still be red when the train is coming back around the loop.


    I made a wiring diagram in Illustrator using graphics from some of the Viessmann manuals, but stopped as the wiring was getting confusing. I just was wondering if you guys could check to see if I'm going in the right direction. I also want to have a manual override using 5546 for only the yellow signals. Would this be possible? I also wanted to have circuit breakers by digitrax to protect the locomotives, and possibly the Viessmann elements. I figured that it would go in between the feeders from the track to the occupancy detector.


    Many thanks.


    http://forum.spur-n-schweiz.ch…nt.php?attachmentid=13745

  • Hello,


    the request will be processed and answered by mail soon.


    Many regards
    Wolfgang Brinken

    Mit freundlichen Grüßen
    Wolfgang Brinken
    Viessmann Modelltechnik GmbH

  • Thank you. I made a wiring diagram on Illustrator, and the diagram you produced was very helpful. All I need to know now, is where to install circuit breakers within the wiring.


    -Mitch